the next day.

"The black powder has been prepared, and now it's time to make bullets."

Boom!

Boom!

Boom!

The press pressed down again and again, and Zhang Hao carefully pushed the copper sheet. Under the huge impact, the brass turned into a cylindrical shape in the abrasive tool.

Just like that sentence, after being filled fiercely, it has become its shape...

Then use a steel rolling knife to roll off the excess part, and the columnar shells have been formed. .

Although the method is primitive and the speed is far inferior to the assembly line, about 15-20 shells can be rushed out in one minute.

I have been busy for more than an hour and rushed for about 1,000.

Satisfactorily shut down the press.

Start the next step.

Zhang Hao took out another thick lead strip, which was about the same length as a steel wire, and began to cut it.

Click, click, click.

Based on the feel alone, he quickly tied the lead strips on the rolling sheet into small sections, which was quite fast.

However, the next step is the slowest.

Replace with a pointed mold and place it on the punching machine.

Place a copper sheet of uniform thickness on top, and carefully place a small lead strip on the center of the copper sheet.

Boom!

Press down the stamping rod, and a bullet is formed!

Repeat the above steps and do it again!

Boom!

Boom!

After rushing for a few minutes, he stopped temporarily and began to check the results.

Under the light, the streamlined brass bullet looks perfectly suppressed, and the lead strip has become the core of the bullet. The two are integrated and beautiful.

This makes him feel unreal.

Can I make bullets by myself?

Really...

feels so good!

"It's just a little different from what I saw in the video..." He murmured.

"It still looks decent outside."

"But because of manual work, there is definitely a problem with the thickness of the warhead."

"Well, even the lead of this warhead is exposed. It's a waste product."

"So it seems that the yield rate can achieve seven or eight achievements."

"This is still required by extremely low standards. Otherwise, according to strict modern standards, the yield is estimated to be only 3-4%?"

"Ha ha!"

The bullet head is not pure copper, it is too soft and the cost is too high.

To pursue armor-piercing ability, a steel core is wrapped inside, which is an armor-piercing projectile.

The purpose of wrapping the lead core is to pursue thorough penetration and lethality.

A bullet hit the human body, and the mouth of the bowl was big with a blood pit. Not to mention the counterattack in the movie, he was already a man who could hum a few words before he died.

"My Mauser 98K uses a self-made barrel and self-made bullets. It has a 7.62 mm size and has great lethality."

"This gun used to have a small flaw: some bullets had too strong penetrating power, and directly penetrated the human body after hitting it, which actually reduced its power."

"But using my self-made inferior lead bullet is equivalent to taking the initiative to reduce the penetration and increase the lethality... the inferior bullet explodes in the human body... the picture is too beautiful..."

This belongs to crooked beating.

To use the terminology in the game.

This is a typical anti-human Dum bullet with increased bullet damage and reduced armor penetration!

"And with its 7.62mm caliber, within 50 meters, even if someone wears a military bulletproof vest, it will only make oneself die even worse..."

"After the bullet penetrates the body armor, it will spin and explode in the soft human body, creating a terrifying cavity. Countless shrapnel can't be taken out. If you are lucky, you will be killed on the spot. If you are lucky, you will mourn to death. This kind of lead poisoning, The gods can't be saved!"

Violence!

This is the weapon a man should use!

"This gun may not have enough long-range accuracy, but I am only able to shoot birds with an air gun of 20-50 meters. I don't even bother to shoot at a distance of 100 meters."

"It looks like this, a magical tool!"

After working all day, Zhang Hao was full of spirits after seeing the results!

I burned the annealing furnace to bake the bullet shells with enthusiasm. While the bullet shells were annealed, they worked tirelessly to make the bullet heads. The sound of pilings continued throughout the night!

The happiness of a man is so unpretentious and boring...

...

the next day.

August 30.

Zhang Hao woke up early and got his leased tank truck, which cost 6,000 yuan.

From morning till night, I never stopped, and ran most of the city, more than 20 gas stations.

The total distance is 112 kilometers and it takes 8 hours.

Every time the main fuel tank and the auxiliary fuel tank were filled, he would find a corner to pump the oil out and put it into the oil storage tank.

Private individuals cannot buy large amounts of gasoline, he can only use this stupid method to keep the warehouse secret.

This kind of behavior is also very risky, but the moment before the catastrophe broke out is not worth mentioning.

The main fuel tank of the cart is 120 liters, and the auxiliary fuel tank he prepared is 80 liters.

The amount drawn after each refueling is about 180-190 liters.

After more than 20 operations, he added a total of 3,800 liters of oil at a cost of 10,000 yuan, and oil reserves were also obtained.

However, plus the consumption of renting a car, the remaining funds are only a few thousand yuan, which is considered to be completely used...

Money will soon become waste paper!

at this time...

There are still 24 hours before the catastrophe!

.................................................. .................

Dear ancestors, the new book is released, please ask for flowers, monthly tickets, evaluation tickets, and rewards!

.................................................. ..................

Thank you for reading this story at wuxiamtl.com. Your support enables us to keep the site running!

Tap the screen to use advanced tools Tip: You can use left and right keyboard keys to browse between chapters.

You'll Also Like