Siheyuan starts from a better life

Chapter 299, Meeting

Author: Flying Wooden Fish

Chapter 299, Meeting

Early the next morning, the jeep that came to pick him up parked in front of his house. When he saw the driver, Xu Damao and the others looked very embarrassed.

"That Wei Baoguo, Xiao Wei, will be his full-time driver from now on." Jiang Yan introduced them to the driver assigned to him by his superiors, but his specific identity was not told to them by Jiang Yan.

Xu Damao and Jiang Yan were in the jeep together, Shitou and Zhuzhu rode the "Wanzi" together and walked towards the steel rolling mill.

"Boss, the factory director asked him to call me to a meeting. Tomorrow the senior leaders of the First Machinery Department will also come to attend the meeting." Not long after he entered the factory and started work, Xu Damao came to his office.

"Okay, wait for him to pack something, and we can go there together."

By the time Jiang Yan arrived at the conference room, a lot of people had already left. All the cadres from the middle to the middle level of the steel rolling mill were already in the conference room.

After Jiang Yan entered, he quickly found his seat and walked to Donglai.

After about ten minutes, the conference room was already full of people. The senior leader who was walking in front turned to Director Yang next to him and said, "Everyone is here!"

After hearing the big boss's words, Factory Director Yang silently counted the people in the east, raised his head and said to the big boss: "Everyone is here."

The big leader nodded after hearing this. He clicked on the speaker in front of him, and then opened a document in front of him.

"According to the request of the leaders at the top, the original technical department of the steel rolling mill will be independent and form a new research institute, code-named 665, which specializes in the research and development of special steel, machinery manufacturing and other equipment. It is tentatively designated as a department-level scientific research unit and belongs to the First Machinery Department.

Directly lead the institute and appoint Comrade Wang Honghai as the first director and secretary of the institute to preside over the overall work."

The big leader stopped there for a moment. Walking to the east, a man about forty years old with a Chinese character stood up and looked around to see if that person was meeting the newly appointed researcher.

Director Wang Honghai.

The reason why a director parachuted in here is to get along with Jiang Yan, so that Jiang Yan can concentrate on scientific research tasks, and most likely to protect Jiang Yan. After all, Jiang Yan is only twenty-one years old now.

, the age is really a bit young, after all, the trees are as beautiful as the trees, and the wind will destroy them.

Those big guys understand that. They don't want to praise Jiang Yan. Everyone sees what he did in the years after he came back.

The two people in Bu Nao are at the same level, both level 13 and department level, and they specifically talk to Wang Honghai. Jiang Yan still has the final say on matters related to scientific research.

Jiang Yan was not very satisfied with the arrangement he made in person.

Then the big leader spoke again: "Comrade Jiang Yan is appointed as the chief engineer of the institute to take charge of scientific research tasks. At level 13, Jiang Yan is relieved of his position as chief engineer of the Third Steel Rolling Plant and changed to a consultant."

As soon as the news came out, there was an uproar in the east. In fact, everyone knew that Jiang Yan had completed many tasks when he went out, and also knew that Jiang Yan would be promoted. Everyone thought that he wanted to become the deputy director of the steel rolling mill. Unexpectedly, the country directly

A new scientific research unit has been established. The news is really exciting.

"It was decided at the higher level to establish an experimental site integrating production and research. The experimental units are the 665 Research Institute and the third rolling mill."

As soon as the big leader's words came out, everyone in the east looked confused. No one had heard of the industry-research integration, and everyone couldn't help but look at Jiang Yan who was walking there.

The establishment of an integration of production and research was an idea that Jiang Yan put forward in a meeting with a group of big guys before. In fact, the integration of production and research was very common in the later period.

Specifically, it means that industries, scientific research institutions, etc. should cooperate with each other and give full play to their respective advantages to form a powerful advanced system integrating research, development, and production.

Scientific research institutes have technology, talents and platforms, and enterprises have production capabilities and market channels. Through industry-research cooperation, both parties can give full play to their respective advantages, share resources that are inaccessible to each other, promote the transfer and transformation of scientific and technological achievements, and transform scientific and technological innovation into

real productivity.

The reason why Jiang Yan put forward such a point of view is because in the history he is familiar with,

Their universities, scientific research institutes, and enterprises operate on different tracks, and not many can be combined in depth, resulting in a lot of waste of resources. Often, the things developed by scientific research units are too advanced and not suitable for reality and are shelved. A lot of this is because

If the information is good, other countries are willing to spend a lot of money to purchase technologies that have been developed by scientific research institutions.

For example, in 1958, Sijiucheng No. 1 Machine Tool Factory cooperated with Tsinghua University to trial-produce China's first CNC machine tool - the X53K1 three-track CNC machine tool. The birth of that CNC machine tool filled the gap of other countries in the field of CNC machine tools.

Empty red.

At that time, they misunderstood the characteristics of CNC machine tools and did not have enough understanding of the development conditions. They blindly developed due to poor personnel quality, unreliable foundation, and substandard quality of accessories. In the past, their performance was too poor to be used in production.

And terminate.

As a result, other countries' machine tool industries have lagged behind the world for thirty years, which is a pity.

I don't think a small machine tool is inconspicuous, but it can be the cornerstone of a strong country.

To prevent history from repeating itself, Jiang Yan could have told later generations in that report some of the reasons for the lagging behind of machine tools in other countries.

Jiang Yan gave a large amount of evidence and analysis at the meeting on whether to avoid other countries' machine tool industries from going blue again, and proposed that the machine tool industry has two important development directions in the future, "aiming at intelligent production" and "improving stand-alone machine standards".

” as the goal.

"Taking intelligent production as the goal" means that machine tools will have communication capabilities, enabling real-time interconnection between machines and machine tools, machine tools and other production equipment, and machine tools and management centers. Is the core of "raising single machine standards" "higher"?

, faster, stronger". The development of machine tools has always been centered around the improvement of three core indicators: precision, speed and performance. In the past, it was able to meet the processing needs of new materials and new industries, and achieve cost reduction and efficiency improvement.

The purpose. Therefore, additive manufacturing, compounding and specialization of single machine functions are not the focus of future innovation.

At the meeting, Jiang Yan used the example of Hans Guo to illustrate. He also pointed out that the machine tool industry has high technical threshold, high professional division of labor and a long-term accumulation process of demand.

He also pointed out that other countries have weak industrial foundations, poor "nutrients" and no complete machine tool industry R&D system, which seriously restricts the development of other countries' machine tool industries. On the in-stream design and manufacturing side, other countries have weak foundations in materials, parts and experience.

, it is difficult to support the realization of full independence in the field of high-end machine tools; on the Dongyou application side, without imported raw materials, high-end machine tools are as useless as "scrap copper and iron" in other countries.

Is it because of Jiang Yan's bold explanation at that meeting that the leaders used the newly established branch research institute and the third rolling mill as pilot plants? At the same time, Dongda Document requested foreign "Eighteen Arhat" machine tool factories to work hard on foreign skills. Resolutely prevent them from leaving.

On the road of "greedy for big things and quick things".

As a result of what Jiang Yan did, his security level was once again raised by the leader, but Jiang Yan still had no regrets.

(End of chapter)