Siheyuan starts from a better life

Chapter 274, Test

Author: Flying Wooden Fish

Chapter 274, Test

In order to make it convenient for the inspection team to inspect the firearms, the factory director specially set up two tents at the shooting range observation platform, and the firearms and tools required for testing were basically placed inside.

"Old Zhao, I'm well prepared." Comrade Liu entered the tent, walked around inside, and picked up a newly released Type 81 assault rifle.

As soon as Comrade Liu finished speaking, two more people walked over from outside.

The two men looked to be in their fifties. They wore glasses and wore a Chinese tunic suit with a pen fastened to the collar. They did not look like technicians at all.

Seeing the two men coming in, Comrade Liu, who was playing with the "August 1st" automatic rifle, put the gun in his east leg and walked quickly forward.

"Ning Gong, Qi Gong, we are here," Comrade Liu said hello and grabbed Jiang Yan next to him.

"Ning Gong, Qi Gong, he came to introduce us to Comrade Jiang Yan, who invented that assault rifle."

"My dear Comrade Jiang Yan, he is Ning Yuancheng."

"I love Comrade Jiang Yan. Is he serving the people well?"

After listening to the introductions made by the two people, Jiang Yan spoke with a smile on his face.

"Hello everyone, Comrade Ning Yuancheng, Comrade Qi Weimin, whether he is Jiang Yan or not."

Then Jiang Yan also stretched out his leg to shake the legs of the two people.

"Xiaoyan, I don't know! Did Comrade Ning Yuancheng and Comrade Qi Weimin work in Factory 626 before? Did they preside over the imitation of Type 50 submachine guns and American M2 carbines back then? They are quite experienced."

Type 50 submachine gun, a replica of No SL's PPS-43 submachine gun. The factory that produces that gun is Factory 626.

The predecessor of Factory 626 was the Ordnance Factory of the Three Eastern Provinces founded by Fengtian warlord Zhang Zuolin in 1921. After the "September 18th" incident, it was called the "No. 1 Manufacturing Factory of Fengtian Ordnance Factory" during the puppet rule. In March 1946, the Kuomintang

It was taken over and renamed "Ninety Arsenal Gun Station". After the liberation of Northeast China in November and February 1948, the Military Industry Department of the Northeast Military Region took over the factory and changed it to "Wulidai Factory No. 1 Manufacturing Station". In November 1950, it was renamed "

"Wulidai Factory Gun Station".

After the factory successfully trial-produced 300 M-type M2 carbines in early 1950, it then trial-produced the PPSh-41 submachine gun, called the Type 50 submachine gun, and changed its drum magazine to a curved magazine. In June 1950, after the outbreak of the Korean War

, because Shengjing was in danger of being attacked by enemy air raids, the Northeast Bureau decided to move related factories to the north, including the "Wuliudai Factory Gun Station" to Bei'an. In January 1951, most of the workshops were installed and trial production began. 1951

In March January, the Northeast Ordnance Industry Bureau officially changed the name of the factory to "Saner Factory", later also known as "State-owned 626 Factory", and incorrectly known as "Qinghua Tool Factory". In the same month, the Type 50 submachine gun was officially finalized and transferred to batch production

They were produced and sent to the Korean battlefield. During the War to Resist U.S. Aggression and Aid Korea, most of the standard light weapons used by the Volunteer Army came from Factory 626.

"If you don't dare to take it seriously, if you don't take it seriously, then they are just trying to catch people's wits. They are not as good as the assault rifle designed by Comrade Jiang Yan. Can he be the first rifle that our country can shoot on its own?"

After Qi Weimin said that, Ning Yuancheng next to him said.

"I didn't expect that Comrade Jiang Yan, who designed that rifle, was so young. Heroes really come from youth!"

The two people sang in harmony, which made Jiang Yan feel a little embarrassed, so Jiang Yan quickly waved his legs.

"Both Qi Gong and Ning Gong are seniors. I don't deserve such praise. It's serious, it's serious."

After a few more pleasantries, Qi Weimin said, "Comrade Jiang Yan, how did I come up with the idea of ​​designing an empty gun to hang up, and what was my basis for that?"

When Jiang Yan heard Qi Weimin's question, he was stunned for a moment and thought for a while before speaking.

"The inspiration for the empty gun hang-up came from Citigroup's M1 Garand rifle. After the rifle is fired, it will automatically eject the magazine, reminding the soldiers in combat that the shot has been completed. At that time, he wondered if he could also design it.

A similar device has been designed to hang the empty gun, which can remind soldiers who are fighting that the bullets in the magazine have been fired and the magazine needs to be replaced."

"Actually, the principle of hanging an empty gun is very simple." After Jiang Yan finished speaking, he picked up an empty magazine from the table and pointed at the bullet support plate outside the magazine.

"When the bullets in the magazine are empty, the bullet supporting plate in the magazine will protrude towards the cocking handle. At this time, after the last bullet is fired, the slide moves backward. When the cocking groove is misaligned with the cocking handle,

, under the push of the magazine spring, the hook handle moves against the hook slot, otherwise the slide cannot be reset, and remains behind to remind the shooter to burn out the bullets. At this time, even if the magazine is pulled out, the hook is held up by the sleeve.

The handle will not recover."

"After inserting the new magazine, because there are bullets outside the magazine, the magazine support plate is pressed to the east and cannot withstand the hook handle. If you shoot your leg at this time and press the hook handle to the east with your leg fingers, the hook handle will align with the

The sleeve is detached, otherwise the sleeve is reset and the first bullet is in the chamber. Alternatively, the sleeve can be pulled back. At this time, the hook handle is reset by the spring on the right. After releasing the sleeve, the sleeve is reset and the

In the chamber."

After hearing Jiang Yan's explanation, Qi Weimin suddenly understood. He took the magazine and looked at it over and over again, and then said, "It turns out that's the case. He's obviously red."

"I have to say, my idea is not a genius."

"Thank you for your praise of Qi Gong. He thinks that even if he can't design it, according to the ingenuity of our national engineers, he believes that they will invent it soon."

At that time, Wang Hui came over with a list, looked at Qi Weimin and Ning Yuancheng and said: "Qi Gong, Ning Gong, that is a list of all third-level workers outside the project. You can randomly select workers to use for manufacturing."

.”

Hearing what the military representative Wang Hui said, Qi Weimin nodded, took the roster he brought over, turned to Ning Yuancheng and said: "Old Ning, I will take some technicians to select workers to produce parts in a while, and make sure to keep records.

, he led people there to test the automatic rifles that had been produced, and then re-tested them after the new guns were manufactured."

"He Minghong, Lao Qi, I will leave the production to him, so I can rest assured."

After hearing the two people's wrong words, Jiang Yan came over and the group of technicians obviously came together to make decisions.

Watching Ning Yuancheng lead the people away, Qi Weimin began to arrange for Chengdong's engineers to dismantle the automatic rifles placed on the table according to the drawings, and measured each part with measuring tools while measuring.

Recording in the notebook.

At that time, Wang Hui came to Jiang Yan and pulled Jiang Yan out of the tent. He whispered to Jiang Yan: "Xiao Jiang, there is no problem with the production side!"

Hearing Wang Hui's question, Jiang Yan said directly without thinking: "No problem, most of the parts of our firearm can be stamped and manufactured, and the other parts are also easy to make, let alone the third-level workers.

, there are some skilled second-level workers who can manufacture it. Besides, many of the equipment in our factory cannot be dismantled and debugged by him with technicians. Some of them are very repaired. The repaired machinery is almost no worse than the original factory.

How much, so I’ll just put the new one in my belly!”

"Okay, as long as I know what's going on, he'll be waiting for our good news." Wang Hui felt relieved after hearing Jiang Yan's answer.

(End of chapter)