Reborn 80s

Rebirth in the 1980s Chapter 236 Our lithography machines were also in full bloom back then

Chen Huaiqing pays more attention to semiconductors. After all, although the aircraft will not produce results for a while, the R&D team is still there. As long as the direction of R&D is adjusted, it will be fine.

However, the semiconductor industry is still in a somewhat confused state in China.

To put it bluntly, it means not paying enough attention to it.

In the hotel in Beijing, Chen Huaiqing made a phone call to Song Qi.

"Find a way to get Chengdu to establish a semiconductor factory in Chengdu."

Song Qi was stunned for a moment. The reason why Chen Huaiqing did this was because he didn't want to put his eggs in one basket?

A bit weird!

Song Qi hung up the phone, somewhat confused as to why.

Previously, we were obviously planning to build the semiconductor factory in Yuzhou, but why did we suddenly say that it would be built in Chengdu?

Can Chengdu be more convenient than Yuzhou in terms of transportation?

At this time, there were very few passages out of Sichuan, and traffic conditions greatly restricted the development of Chengdu.

Placing the factory in Chengdu does not seem to be a good choice.

After a product is produced, it always has to be transported.

But what can Rongcheng use to transport it?

Use a plane!

Chen Huaiqing said it would be transported by plane.

Really, these are exaggerated!

The cost of transporting it by plane is a bit high.

As high-tech semiconductor products, the added value of technology is quite high, and the products are relatively small and exquisite, so there is no problem in transporting them by airplane.

Chengdu is a bit congested in terms of land transportation, but the existence of Chengdu Airport somewhat makes up for it!

Putting aside these thoughts, Song Qi felt that since the boss Chen Huaiqing had changed his mind, he must have some considerations.

How to follow Chen Huaiqing's request and quietly let Rongcheng know about it and fight for it?

In Shuchuan, Rongcheng and Yuzhou are like two brothers in the family. They both need development, and development requires resources.

The entire resources of Shuchuan are limited.

Undoubtedly, this has become a problem.

No matter which city is given a little more, the other city will definitely cause some trouble.

Compared with Yuzhou, Chengdu's economic development is far inferior.

Yuzhou's economy is already on the verge of success. In the motorcycle and automobile industries, the development speed can be described as rapid.

However, Chengdu has not yet found its own development direction.

The gap widens...

Anyway, Song Qi is sure that as long as Rongcheng knows the news, it will definitely be extremely interested.

Song Qi thought about it and decided that he couldn't tell Rongcheng this news directly.

The deal on the pole cannot be done!

Therefore, you have to pay attention to the strategy.

You have to pretend that the news leaked out accidentally and let Rongcheng fight for this opportunity.

Then, with the support of Chengdu and the province, the semiconductor factory was moved to Chengdu.

Chen Huaiqing didn't care how Song Qi solved this matter. At this time, he was sitting in a conference room of the Fourth Machinery Department, with a thick pile of information in front of him.

Look at the information given to you by the Fourth Machinery Department.

There is a feeling of refreshing the three views.

Yes, Chen Huaiqing's three views were greatly refreshed.

Lithography!

At this time, China is not much worse than its international counterparts in the field of lithography machines.

The lithography machine is the core part of chip manufacturing. This is where China is most stuck in chip manufacturing.

Without the most advanced photolithography machines, chip manufacturing can only rely on process technology to make up for the lack of hardware.

But this kind of compensation cannot solve the fundamental problem. To put it bluntly, it treats the symptoms rather than the root cause.

If you want to get rid of this embarrassing situation, you still have to have the most advanced photolithography machine.

Previously, Chen Huaiqing really didn't know much about the situation of domestic lithography machines.

I just know that Shencheng Microelectronics is the most advanced lithography machine R&D and manufacturing unit in China.

Shencheng Microelectronics Company developed a back-end 90nm lithography machine, but because it used a large number of foreign parts, its supply was directly cut off by foreign parts manufacturers.

The photolithography machine developed by Shencheng Microelectronics Company cannot be mass-produced directly.

The inability to achieve mass production of products means that the initial investment in R&D cannot be recovered.

Shanghai Microelectronics Company can only turn to research on front-end lithography machines.

Front-end photolithography machines are mainly used for semiconductor screens.

Yes, the screen is also produced by a photolithography machine.

But now someone told Chen Huaiqing that China's photolithography machines are not bad.

Chen Huaiqing raised his head and looked at Zhao Jiansheng: "Leaders, are you sure that the information you showed me is not adulterated?"

The first photolithography machine was launched in the mid-to-late 1960s.

In 1980, the automatic alignment distributed projection lithography machine was successfully developed, and the thinnest line width processed was 08 microns.

At this time, there are really quite a few lithography machine R&D teams in China, and it’s not like in the end, only Shencheng Microelectronics is left alone.

Factory 109 is a pilot plant for the development and production of high-tech semiconductor devices and integrated circuits.

Zhao Jiansheng sneered: "Why, are you surprised?"

Chen Huaiqing: "I'm not just surprised, but also unbelievable. Originally, I thought that our photolithography machine technology was very backward, but I didn't expect that the country has developed to this level."

At this time, compared with the world's most advanced level of domestic lithography machine technology, the gap will definitely not be too big, and it may only be within five years.

It's not like after the 21st century, this gap has widened to four generations.

When it comes to EV lithography machines, lithography machines are the fifth generation!

In other words, the level of domestic lithography machines at this time is in the second generation.

Of course, the level of photolithography machines worldwide is still in the second generation.

However, when developing the second generation, problems arose in the development of domestic lithography machines.

The main issue is commercialization.

There is still a gap between domestic lithography machines and foreign lithography machines. Once there is a technological breakthrough in China, foreign countries will follow suit and sell lithography machines that were not sold before to domestic lithography machine manufacturers.

Then domestic lithography machines will naturally lose the market directly.

After entering the market economy era, projects that do not make money are no longer good projects.

So the result is that there is no market for domestic lithography machines, and there is no R&D funding. Naturally, there is no way to carry out the next step of R&D work, and the R&D team is gradually disbanded.

The research and development of photolithography machines has also been gradually abandoned.

After all, many people at this time have this idea in their hearts. The technology they make is backward, so why not buy more advanced ones from abroad.

Buying is worse than making has become the mainstream view at this time.

Chen Huaiqing: "I want to meet Xu Ruiyi from Huaqing University."

Chen Huaiqing has some impressions of Xu Ruiyi's name, the father of the Chinese compact disc.

Why are CDs so cheap?

Because the Chinese got involved.

Chen Huaiqing really didn't know that Xu Ruiyi was actually developing photolithography machines before.

The results were achieved in the 1970s.

And now a step-by-step projection lithography machine is being developed.

Chen Huaiqing had to lament that if China's economic strength was not weak at this time, there would be foreign affairs.

Chinese scientists really do not lack intelligence and intelligence. As long as they are given the right support, they can conquer the world.