Siheyuan: The Villain's Cool Life

Shen He had a direction and inspiration.

Before building this car, a stamping platform at least 7 meters long and 4 meters wide must be built first.

This challenge... is really fucking amazing.

Shen He came out of the stamping workshop and found Secretary Guan, who came to his office and asked him for something.

The matters here were handed over to Kang Zhengwen.

As soon as Shen He arrived at the office, he started writing and drawing again.

First calculate the pressure required to stamp the base plate, and then calculate how much oil is needed.

All of this needs to be calculated. It doesn't mean that if you want to do it, you can just do it according to this size and be done with it.

Don't make trouble, this will cause problems.

After this calculation, time had unknowingly reached noon.

Only after Secretary Guan brought in the meal did Shen He look up.

"Mr. Shen, it's time to eat."

"Oh, put it down. I still have a file to calculate."

"Okay, Mr. Shen.

Engineer Shen, Engineer Yu is back. Do you need to ask him to come in?"

"Well, that's fine. Just let him and Lao Kang watch over the lab. I'll put up a Do Not Disturb sign on the door."

"Okay, Mr. Shen."

Secretary Guan left the office and casually put a piece of paper on the door that said "Please do not knock on the door. No disturbance allowed."

This busy work lasted until after 3 o'clock in the afternoon.

Then he breathed a sigh of relief.

Looking at the results of his calculations, Shen He was happy.

The stamping machine produced based on this data can be used to make not only cars but also tanks for fun.

Soon, Shen He came up with a plan.

Now that we have the data, we just need to fill in the blanks.

An oil storage tank is needed, and there is also subsequent maintenance.

A little bit of oil is precious.

However, for the parts produced by the super-large stamping machine driven by this little oil, it is already very simple.

It only took Shen He half an hour to draw the diagram of the large stamping machine.

Shen He took the blueprint and went out.

There was only one person on duty in the office opposite.

Everyone else is not here.

Know a lot in the lab.

Sure enough, I saw a lot of people when I arrived at the laboratory.

"Haha...Brother Shen, you are here." Li Huaide was very enthusiastic when he saw Shen He coming.

"Brother Li, I want to build something, you don't know how difficult it is. Look, there's no car yet, I have to make a hydraulic stamping machine first.

How about this? When it’s built in the future, this machine will become a steel rolling mill.”

"Yeah, that's great."

is not that right?

With this stamping machine, Li Huaide can do more.

As for Yang Shengli...there is nothing to be afraid of.

Chapter 276: Sharpening the Tools First

Confucius said: "If a craftsman wants to do his work well, he must first sharpen his tools."

Shen He felt that he was doing the same thing now.

There was no car, but a lot of stuff was built.

It is now the end of May.

The hydraulic stamping machine has been manufactured and many people are watching the assembly on site.

Shen He doesn't care about this thing. He made it just to build cars.

It’s very annoying now.

His original car was taken away by someone.

Not only was it not returned to him, even the first engine prototype was taken away by the Academy of Sciences in the name of learning.

It doesn't matter.

As long as it doesn’t delay me from building my own car.

But no matter how you jump around.

Shen He has already written many of his design concepts into patent applications.

Now there is a whole box.

When I have time, I will ask my teacher for help and have someone take these materials to the United States to apply for a joint patent.

This way, you only need to apply once, and the patent will be effective in other countries that have joined the United Nations.

Although the actual patent law was not implemented until 85.

But it didn't prevent Shen He from applying first.

"Mr. Shen, congratulations, you have completed another domestically pioneered project."

"I don't dare to take the leadership role. We still have to see how this machine performs."

“Haha…Okay, let’s see.

Engineer Shen, with the blueprint for this machine you built, we can make a radical and earth-shaking transformation of our industry."

Shen He nodded and said nothing.

This Ministry of Industry leader seemed a little weak, and Shen He didn't want to say anything.

The most important thing is that Yang Shengli is standing behind this person.

And there was also the leader mentioned by Yang Shengli later.

Shen He didn't want to say anything, just watched the workers assemble it carefully.

Mental power is also being distributed.

Always pay attention to everyone's safety.

Each part of this thing weighs tons. If you don't handle it properly, it will become a meat paste that can't be put back together.

Fortunately, everything went very smoothly.

After connecting the last oil pipe, the entire stamping machine is completely completed.

At this time, a huge horn sounded, asking everyone to leave.

The loudspeaker started to arrange the next step of work.

It is to inject oil.

Then we conduct the lifting experiment.

There is no problem.

Then we started to get the car chassis that needed to be stamped.

The cast iron plates at Shenhe's side are ready and have just been preheated.

This is a 3 cm thick carbon steel plate, and its main feature is its strength and hardness.

But after heating, it is not so hard anymore and is just right for stamping.

The steel plates were in place, and a man waved two flags a few times.

Irrelevant people are asked to stay away.

Who knows what this first stamping machine will be like.

I was relieved that those extreme imaginary things did not happen. I was standing at the front and my mental focus was always on the operation of the machine.

Imagination is one concept, and the real thing is another concept.

But the result was good and Shen He did not lose face.

There was a loud bang and a boom.

The machine fell down steadily.

Everyone at the scene fell silent.

At this time, the commander began waving the flag in his hand again.

The person operating the machine lit the fuel injection.

This injection is to make the machine rise up, and the oil on the other side needs to be drained out.

The punching machine suddenly shook and slowly rose up.

The car chassis that has been cut and pressed is exposed below.

Hang the hook here and pull it out directly.

Arrived at the placement area on the side.

Without waiting for it to cool down, the technicians went up and started testing.