I became a witch, but I started the industrial revolution

Medea, who looked rather lazy and absent-minded, stopped where he was when he heard that, turned around and looked at Golitsyn with strange eyes.

After this old guy was criticized by Medea at the conference, everyone thought he was going to be finished.

As a result, the Ministry of Internal Affairs found out during the investigation that the old man did not engage in corruption or bribery except for some greed for food. If sending food is counted, then he did engage in corruption, but Medea did not care about that.

She found that she might have a conflict with Golitsyn. Every time he said something, he would hit her sore spot accurately, especially his ability to set flags...

When it comes to corrupt officials, her views on this are different from those of ordinary people.

She allows a certain degree of greed, provided that you can do your own job well and not do things in a shoddy way.

For example, in large government projects, if the gap in levels between the two parties is not too big, and as long as they can complete the project requirements, pass the material inspection and account review by the tax authorities, and there are no problems within the rules, then she will turn a blind eye.

It is definitely impossible to stop it. Once a person controls a certain amount of power, he will definitely want to cash it in, otherwise he will be extremely anxious and unbearable. Either he is not greedy, or he will be greedy enough for eight lifetimes at once.

So she could open a small opening to allow them to vent their emotions, as long as they didn't reach out where they shouldn't.

Why did she specifically set up some large state-owned enterprises to monopolize the luxury goods market?

In addition to making profits for the country, this iron rice bowl that guarantees a stable income also provides security and a way out for the descendants of these people.

If you really can't make it outside in the future, working in these companies will be enough for you to start a family and live a stable life.

You can talk about ideals and dreams with the first group of people who follow you, but forget about it for their generation. They also have to live, so you have to give them practical benefits.

At this time, a biplane propeller plane with a pilot sitting on it was wobbling across the runway, with the code [MS-01-3] painted on the side of its fuselage.

The plane was running on the runway, occasionally rising slightly off the ground, then landing again, and finally slowing down and stopping steadily.

This test flight did not take off. It was mainly to test whether the overall fuselage structure is solid, the durability of the fuselage skin, the working conditions of the in-line engine and a series of other ground tests.

Previous wind tunnel tests of gliders have verified the feasibility of flying into the sky, and measured the optimal coefficients of forces such as lift, and then produced a prototype with sustained power.

With continuous experimental improvements, mass-produced prototypes are testing various data at the airport in order to complete the trial production and initial installation as quickly as possible.

This is one of them. The other one is flying in the sky to verify whether the aerodynamic shape is reasonable and to test the approximate flight speed.

In fact, the degree of completion of this aircraft is already very high. It can be said that as long as the test meets the requirements, we can start placing orders with the factory for trial production.

And began to reorganize a new professional aircraft manufacturing plant.

The fuselage frame is made of all-aluminum alloy, which is light and strong. At the same time, through various welding and the setting of steel wire and aluminum tube, the fuselage skeleton is made strong enough to the greatest extent.

As for the wings, wood is used as the skeleton, with special ropes inserted in the middle to fix them. The interior is mostly hollow to reduce weight, the outer layer is lightweight plywood, and the outermost layer is the fuselage skin.

The upper and lower wings are connected and fixed to each other, and can serve as a load-bearing whole. At the same time, they also have a large wing area, which can still generate enough lift under low-speed conditions to take off smoothly.

However, the verification machine produced with the heterogeneous four-stroke engine had many problems, so it was replaced with a more mature and reliable inline six-cylinder engine with a rated output of 180 horsepower and a peak power of 1500 rpm, which is completely sufficient.

The engine's exhaust is at the top, the air intake is at the front, the crankshaft is directly linked to the wooden propeller, and the fuel tank is located just behind the engine, which can support about an hour of continuous flight time.

The most important thing is the flight control system. The vertical control stick located in the cockpit can be moved forward and backward to adjust the up and down of the tail wing and control the pitch angle of the aircraft.

Moving left and right can adjust the ailerons on the upper wing to control the roll angle of the aircraft, while the pedals control the tail wing and are responsible for the horizontal steering of the aircraft.

Getting the weapon onto the plane was also a difficult task. Installation was simple, but federal scientists had been struggling for a long time to figure out how to control the machine gun so as not to hit the propeller blades.

The water-cooled Maxim heavy machine gun was not suitable for being carried into the sky, so an air-cooled heavy machine gun was redesigned and manufactured. It used a mechanical ammunition feed system. The magazine box was located under the machine gun, and the box in front was used to hold spent shell casings after firing.

Finally, it was Medea who gave them inspiration. The engine crankshaft is directly connected to the propeller, so a small gear transmission system can be designed and installed at the rear of the engine.

The amount of work done by the engine determines the number of times the propeller rotates, so as long as each stroke collides with the reserved gear to drive the machine gun trigger to shoot, the propeller blade will naturally not be hit.

The function of the firing trigger on the pilot's seat is simply to push the gear into the reserved groove to activate the working process.

In addition to the beginning of progress in aircraft manufacturing, reverse research on aircraft has also made some progress, including the standard aircraft of Vatican soldiers seized in the Lalor War.

This three-meter-tall machine is basically a similar product to her previous idea.

To put it simply, this three-meter-long machine is a self-propelled platform that carries a power source package. The soldiers inside use the magic power to open shields and release magic, and then run away. That's all.

If you want to control the machine for close combat, you cannot randomly release long-range magic, and can only maintain the normal operation of the shield and the machine.

Then if she equips this on tanks, armored vehicles and even warships, she can achieve similar effects without consuming that much energy.

After all, if you want to build a self-propelled platform, she pointed out the fuel engine, and even the original magic potion engine was very good. This power pack can be used as a shield generator.

In terms of attack power, she felt that the attack power of industrialized weapons was not low. Instead, the defense was insufficient, and being attacked by magic was basically the end of the game.

This was the reason why she had been reluctant to point out the heavy armored units before. No matter how thick the steel plate was, it would be difficult to resist the damage caused by high-level magic.

The various properties that come with magic, such as ultra-high temperature melting, ultra-low temperature freezing, etc., put too much resistance requirements on the outer armor material.

Since heavy tanks and armored vehicles will die just as badly from the same magic, why bother making tanks that are more expensive and take longer to build?

Her previous plan was not to manufacture heavy equipment until she developed armored steel that could resist magical properties.

But now with the goblin's magic power pack, this is no longer a problem.

A magic power pack is installed externally to create a magic shield to resist damage. The heavier the war machine, the larger the internal space will be for installing a better power pack.

Resist more poisonous attacks and provide more fierce firepower, perfect.

Chapter 101 Dragon Lady Elsa Fafnir

"My name is Elsa Fafnir, hello little sister."

She had the same silver hair and purple eyes, but she had two pairs of long black horns on her head, her honey-colored skin looked very healthy, and most importantly, she had a curvy figure, so good that even Medea felt ashamed of herself.

[So big...]

Looking at the tall lady in front of her who was more than two meters tall, Medea looked up with an awkward but polite smile on her face: "You are...big, sister."

After saying that, she turned to look at Xueliya, her eyes full of doubt, as if asking: "This is what you said, [Little! Lady!]?"

Shirleya crossed her arms and turned her head to the other side, pretending not to see Medea's murderous look, but she quietly rose one meter and flew to the same height as Elsa.

After rummaging in the ravine of her plump chest, she took out a space ring and threw it into Medea's hand. Elsa hugged Xueliya and kneaded her: "Little cutie, do you miss me?"

"Hmm..."

"I knew you would miss me. It's so boring on the island and I can only sleep. Finally I can come out and get some fresh air."

"Mmmmm!!!"

"Oi! Stop biting~"

Breaking free from Elsa's chest, Shelia dodged and hid behind Medea, panting heavily: "How despicable! Next time I will definitely ask the witch sister to transfer me to another team!"

"Hey~ If you leave, someone else will ride on me. Are you really willing to let me go?"

Hearing what Shirleya said, Elsa didn't care. She stretched her limbs, fully showing off her sexy figure. Her purple animal eyes blinked mischievously, sending sparks to Shirleya.

"Get lost!!! You really are, a perfect match for all my stereotypes of a female dragon!"

Elsa narrowed her eyes upon hearing that. Her plump buttocks transformed into a long tail that quickly hooked the smaller Shirleya and tied her up tightly, then held her in front of her: "What did you just say?"

"What...what's wrong! Am I wrong? If you have the guts, let me go. I want to fight you one on one!!!"

"Call me sister and I'll let you go~"

Looking at the little thing that was not even as long as the other person's legs but had the hardest mouth in the world, Medea shook her head and ignored them, lowering her head to look through the technical information sent by the other person.

It was similar to what she imagined. Not many goblins had high magical talents, so their skills had little to do with magic, or in other words, little to do with traditional magic.

Magic inscriptions are very interesting things, and you don't need any magical talent to study them in depth.

To use an analogy, if the magical element is the tide of the sea, then the inscription is the pattern drawn on the beach with branches.

The tide brings the sea water to the shore and submerges the pattern. After the tide recedes, some sea water will remain in the pattern. The same is true for magic inscriptions.

Retain the elements. The more elements you retain, the more things you can do. You can release and apply magic elements according to specific arrangements and combinations.

How many elements to leave, what kind of elements to leave, the speed of element supply, the efficiency of absorption and conversion, etc. can all be achieved through different inscription combinations.

The creation of a magic power source pack is to achieve the absorption, storage, and release of elements through the stacking of inscription spells.

Although it is easy to say, how to stack them properly and maintain a delicate balance requires hard work and difficult methods to experiment and verify one by one.

This large-scale experiment, research and creation, data storage, improvement and optimization, combination and arrangement, repeated experiments, and data screening are all monotonous, boring and tedious. It is really hard to imagine how the goblins survived.

Use the most primitive method to repeat one thing thousands or even millions of times in one field.

Medea felt that it was inevitable that the goblins would eventually shine on the continent against the backdrop of such efforts.

Moreover, the manufacturing of a machine is not as simple as just creating a power source. It also involves the ratio of the machine's alchemical materials, the layout of the magic network connecting the entire body, ergonomic experiments, how to pre-engraving magic arrays to release various magics, and so on.

"How about it?"

A faint black shadow loomed over Medea's head. She looked up and saw that it was Elsa who had come close to her. Shirleya was sleeping soundly in her arms. If you ignore the big bump on her forehead, well... she looked peaceful.

Regardless of Shirleya who was physically muted, this little Lolita was really poisonous. The little sister who was over two meters tall was called "orc" by the Dragon Girl. If she was not beaten, she would really tear down the roof and tear down the tiles.

Medea replied: "If we have the blueprint, it won't be difficult to make a one-to-one replica, but... mass production will probably be difficult."

Unlike the standardized cutting of mechanical parts, the engraving of inscriptions is a delicate job...

It's not completely impossible.

Theoretically, there is no problem in manufacturing a batch of engraving machine tools. If it is a CNC machine tool, there will definitely be no problem. The problem is that she can't make that thing~

It is conceivable that a batch of machine tools that can be specially manufactured to engrave inscriptions can be

"Hmm~Mass production... that's an interesting word."

Elsa touched her smooth chin and looked around: "If you hadn't told me, I wouldn't have noticed that your equipment... is really highly consistent in style. This is what is called mass production."

"Um..."

Looking through the inscription patterns on the inside of the power pack in the documents in his hand, Medea was thinking about how to achieve polyhedron cutting.

Sometimes I think about what the blade should look like, and sometimes I think about how to piece the pattern together.

She laughed at the end of the thought. She had confused herself. Why should she let the machine do everything? The machine cut most of the lines, and the remaining difficult parts could be done by workers manually.

Isn't this equivalent to the last step of grinding, polishing and sandblasting in the machining industry?

He threw the blueprints to the old masters to look at, told them his ideas, and then went away, leaving the rest to the dwarf masters to come up with their own solutions.

She is the queen after all, so she must let her subordinates handle the headaches~

Throwing Shelia onto the small bed in her study, Medea slightly changed the facial details and hair color, picked up the cat that was rubbing against her, and the two of them wandered aimlessly on the street.

The Seris Federation does not discriminate against any race, so people of all races can be seen on the streets of the Federation.

"Oh! Such a cute bunny! Tsk tsk... The orc tribes here are almost as good as those I've seen in the Orc Empire, especially so many weak orc races."