Siheyuan, don't mess with me

"Okay! If you can't fix it, I want you to kowtow and apologize in front of everyone in the factory, and get out of here on your knees!"

"Okay! Everybody, be our witness here. I have fixed this CNC machine tool. Director Huang performed a handstand in front of everyone and ate the rice from the rice field. If I have not fixed this CNC machine tool, I will kowtow to Director Huang in front of everyone, admit my mistake, and walk back to Yanjing on my knees!" Chen Zhiguo loudly repeated the bet with Huang Zhiyong!

"Okay! You're a man!"

"If he doesn't eat, push him into the pit in the rice field!" The person who shouted this must be someone who has a grudge against Huang Zhiyong!

"The factory manager is here too, so we're not afraid that they'll do something shameless afterwards!!"

Li Jianshe cursed in his heart, which bastard... who dragged me into this? What do you want to do? Can't I just pretend I didn't see it? When the time comes, should I stop it? Or should I just watch the show from the sidelines? Besides, this CNC machine tool is not a tool for them to bet, nor a tool to settle their personal grudges!

Just when Li Jianshe was hesitating whether to step forward to stop Chen Zhiguo and Huang Zhiyong from making a bet, Chen Zhiguo walked to the distribution box nearby and prepared to supply electricity!

"Wait, you have to give a deadline! You can't say it will take ten or eight years to repair it!" Huang Zhiyong suddenly thought of a loophole and quickly spoke up.

"Haha! Ten or eight years, you are talking about yourself! Even if you are given so much time, you may not be able to understand this CNC machine tool. Don't worry, it won't take that long! Half an hour at most!"

"Okay! This is what you said! Everyone listened!" Huang Zhiyong shouted loudly as if he had heard great news. Li Jianshe, who wanted to stop him, swallowed the words that were on his lips. Half an hour is not a long time. It is definitely not enough time to dismantle the equipment. As long as they don't move around, it shouldn't be a big deal!

Chen Zhiguo didn't plan to do it himself, and shouted to the crowd, "Who is the electrician? Tell me, is the voltage here normal?"

A worker in his fifties walked out of the crowd. You could tell he was an electrician by the equipment he was wearing, because he had an electrician's bag on his back! "I'm Zhao Dahai, a third-level electrician. I've checked the power supply circuit of the entire CNC machine tool, and there's no problem at all!"

"Okay, then please ask Master Zhao to help deliver the electricity!"

"Are you sure?" Zhao Dahai asked hesitantly, and then looked at Director Li.

"I'm sure!" Chen Zhiguo answered affirmatively. Zhao Dahai saw that Director Li also nodded, then he walked to the distribution box and turned on the switch!

The motor of the CNC machine started up immediately, making a buzzing sound!

Chapter 328 Director Huang, don’t go!

As to why Chen Zhiguo was confident that he could repair the CNC machine tool within half an hour, he had taken a look around and carefully checked the machine tool. The machine tool consists of two parts, one is the processing machinery, and the other is the CNC part!

The mechanical part, the cutter head is intact, the roller is intact without bending or deformation, and the entire operating table is spotless, which shows that the user takes good care of it! The motor has no obvious smell of burning, and if it is such an obvious electrical fault, I believe that any electrician can check it out, which means that there is no problem with the mechanical part!

Then the problem is the CNC system. To put it bluntly, Chen Zhiguo really doesn't believe that there is any master in this factory who can play with CNC. If that's the case, this CNC machine tool will not be unusable! Since Director Huang refused to say the fault of the CNC machine tool, it is obvious that it was improperly operated, or he didn't learn how to operate it at all!

As the motor started, the entire machine tool was in a standby state. Chen Zhiguo came to the CNC operating table. This operating table was very simple, with a nine-inch TV-sized screen with buttons on the side. At this time, there was no touch LCD screen, no mouse, or keyboard. The setting of values ​​was entirely controlled by the mechanical buttons around the display screen!

Chen Zhiguo operated it skillfully, browsing quickly from the main interface to the sub-interface! Chen Zhiguo was seen adjusting some values ​​quickly!

"Don't pretend to know everything and tinker with it! If you break it, you will be the sinner of the whole factory! No, you will be the sinner of the whole country!" Huang Zhiyong looked at Chen Zhiguo operating the machine and couldn't help but sneered!

Chen Zhiguo said without even turning his head, "Don't use your stupidity and ignorance to judge others! Just because you are a fool doesn't mean I am a fool!"

"You! You!..." Huang Zhiyong wanted to continue to refute, but was glared at by Li Jianshe. Although Li Jianshe did not understand what Chen Zhiguo was doing, he had been watching the machine tool on site since its installation. Chen Zhiguo's operation of CNC was more proficient than those technicians who came to install and debug, and it did not seem like he was messing around. Only then did he put his mind at ease and stopped Huang Zhiyong from disturbing Chen Zhiguo's operation!

After Chen Zhiguo set all the values, he immediately pressed the confirm button! The nine-inch display screen shook for a while and then turned black!

"Look, Director! He broke the machine tool! I told you he doesn't understand!"

Huang Zhiyong smiled immediately. Chen Zhiguo's operation put a lot of pressure on him. He had to operate the machine tool while reading the instruction manual. He still hadn't figured out what so many buttons controlled!

But now none of this matters. What he cares about is that Chen Zhiguo broke down the machine tool, and all the responsibility can be put on him. That's why he never told anyone what was wrong with the CNC machine tool and why it couldn't work, but kept talking about other things!

If he tells the specific cause of the failure, it is his fault as the director and his responsibility. If he does not tell the reason, he will wait for the manufacturer to repair it, or someone who thinks he is an expert can't help but touch the machine tool, and he can shirk his responsibility! However, in this factory, no one really touches the CNC machine tools, so a bunch of technicians appeared and argued, and the reason why they argued heatedly was that no one did anything. No one is a fool, and in this factory, everyone knows what kind of person Huang Zhiyong is!

Just when Huang Zhiyong was smiling happily and thought he had won the bet, Li Jianshe said coldly, "You, the director of the CNC machine tool workshop, are so happy just because the CNC machine tool is broken! I think you are hoping it will break down!"

"No! No! Director, please listen to my explanation!" Huang Zhiyong was flustered, his mind was spinning wildly, trying to explain why he was laughing so happily just now! Is there really a reason to explain? For a moment, Huang Zhiyong was really a little incoherent!

"Hmph! Stop talking!" Li Jianshe was annoyed just looking at Huang Zhiyong. Why did he trust him in the first place and let him manage the CNC machine tool? He was really blind!

"Director Huang, why are you so anxious? Don't be too happy too early. It's not even half an hour yet. Why are you so anxious?" Chen Zhiguo stabbed again.

"Don't be so complacent. You have messed up the CNC and shut it down! Let's see what you can do?" Although Huang Zhiyong did not dare to continue to speak nonsense in front of the factory director, he still had some confidence facing Chen Zhiguo, especially now that the display screen had gone black!

However, just as he finished speaking, the display screen suddenly lit up, as if Huang Zhiyong had been slapped hard in the face. A burst of laughter broke out in the crowd. After all, there were many people who were dissatisfied with Huang Zhiyong!

Chen Zhiguo saw that the main interface had already appeared, "Okay, if there are any processed parts, bring one over to test!"

"Xiao Wang, go get one!" Seeing this, Li Jianshe's confidence increased immediately, and he quickly ordered someone to get the rough workpiece!

Soon, a young man pushed a workpiece over on a cart, and Chen Zhiguo personally clamped the workpiece! "Drawing!" Chen Zhiguo stretched out his hand, and the young man just found a drawing from a pile of drawings on the operating table and handed it to Chen Zhiguo respectfully!

Chen Zhiguo took a look and then began to input the processing values ​​on the screen in a daze. "Do you understand the drawings? Just press buttons randomly!" Huang Zhiyong seemed to have regained his confidence. Who has such a good brain that he can remember all the values ​​of part processing at a glance? Huang Zhiyong couldn't help but start to mock with pride!

“Shut up! Don’t say you are a fool. You can’t do it because you are stupid!” Chen Zhiguo didn’t even turn his head back. While arguing with Huang Zhiyong, he kept inputting the processing values. There was no confusion and he was not affected at all!

After pressing the OK button again, Chen Zhiguo really felt that the first generation of this CNC machine tool was really cumbersome. He had to press the OK button several times for each numerical input, and for each tool step adjustment, he also had to press the OK button several times. It was really too troublesome. He should upgrade it as soon as possible, otherwise, it would be very time-consuming and laborious to use it in the future!

After Chen Zhiguo finished inputting the workpiece processing values, he pressed the OK button and the CNC machine tool started to run. Although Chen Zhiguo was a designer, it was the first time for him to see the entire running state of the CNC machine tool after it was designed and produced. According to Chen Zhiguo's own evaluation, it was slow! Too slow! Unbearably slow!

For single-sided processing, the operation of the cutter head is still tolerable, but the trimming, shifting, adjustment, and the speed of the entire operation are really unacceptable to Chen Zhiguo. While watching the operation of the machine tool, Chen Zhiguo was thinking in his mind how to improve it, speed up the operation, and strive to develop the second generation of CNC machine tools!

The technical level of the workpieces being processed now is not very high. If it is manually processed, a level 6 worker can barely do it, and a level 7 worker can do it without any problem. The advantage of using CNC machine tools for processing is that the error is small. Even if there is an error, it will appear in the same place. In this way, in the later stage, the installation of the overall equipment can be fine-tuned in a targeted manner. Unlike manually processed workpieces, even if the workpieces are processed by the same master, the errors will appear in different places. The overall error and operation of the assembled equipment will have problems!

It's like a group of workers building a house, and one of the workers built a wall a little bit slanted, not in a straight line! So what to do? If you don't want to tear down the wall and rebuild it, then when you do the plastering later, you can put more plastering on it to make the wall straight! But if all the workers don't build the wall in a straight line, what will the house look like after it's built? Can it still be square?

This is why we need CNC machine tools. Ordinary equipment can produce parts manually and assemble them. It doesn’t require precision, as long as it works! But what about precision equipment? What about parts that require zero error? Even the most advanced eighth-level workers cannot guarantee that they can produce parts with zero error!

Li Jianshe is facing such a problem. He has CNC machine tools, but he cannot produce. He has the highest level of eighth-level workers. All the parts he produces are returned. It seems that the parts meet the requirements, but once the equipment is assembled, errors appear! Now that this CNC machine tool can run, it really solves the problem that has troubled him for many months. The production task he shoulders is not an ordinary task, otherwise the country would not spend a lot of effort to dig caves in the mountains and move the entire factory here. Not to mention how much money was invested during this period, the time and manpower are enough to build several such factories!

Chen Zhiguo felt that the CNC machine was slow, but others did not think so. Many skilled workers gathered around to watch, and really in half an hour, the part was produced!

"Quick! Check it once!" Without Chen Zhiguo doing anything, Li Jianshe quickly called the technicians nearby to check it. After the two technicians checked the drawings over and over again twice, "Report to the factory director, zero error!"

It was like a big rock hitting the calm lake, causing a splash! "Great! Great!" Li Jianshe slapped Chen Zhiguo's shoulder fiercely. Chen Zhiguo dodged. Who is he? If he wants to slap someone, he should slap his thigh! The entire audience of technicians applauded enthusiastically!

"Well done, Comrade Chen Zhiguo, you have solved a big problem for our factory!" Li Jianshe stepped forward and used the same old trick. He patted Chen Zhiguo on the shoulder and said excitedly. Looking at Chen Zhiguo's awkward expression, Ma Huihui couldn't help laughing!

Looking at Huang Zhiyong who was trying to quietly leave the crowd, Chen Zhiguo shouted, "Director Huang, when will you start your performance?"

"I! I! I! I won't argue with you!" After saying that, Huang Zhiyong pushed the crowd away and ran away!

Among the standing crowd, someone shouted, "Director Huang, don't leave!"

Chapter 329 I am the designer!

The parts processed by CNC machine tools were looked at by technicians and senior workers in the crowd. In their eyes, the cold steel parts were like a piece of ancient art! They were looking at them, trying to figure out what they were doing, and simulating their own operating techniques in their minds!

"Engineer Chen, you are amazing. You found the problem in such a short time and restored the CNC machine tool to operation!" In Li Jianshe's eyes, Chen Zhiguo's status was elevated a lot, from a comrade to Engineer Chen!

But Chen Zhiguo is not really an engineer, not because his level is not good enough. When he first worked in the steel rolling mill, he was a technician. Later he was transferred to an administrative position. Later he was too busy to take the engineer's exam!

"It's not a big problem, I just don't know how to operate it. I don't know enough about CNC machine tools! There are errors in the program due to random settings!"

Just after listening to Chen Zhiguo's explanation, Li Jianshe was still looking for a CNC machine operator in the crowd when a tall, thin man wearing glasses walked up to Chen Zhiguo with excitement in his eyes. "Mr. Chen, can you teach us how to operate the CNC machine?"

"He is the operator of this CNC machine tool, Ji Xiaojun!" Li Jianshe saw that Ji Xiaojun spoke first, so he suppressed the reprimand and questioning in his mind, put away the displeasure on his face, and introduced him with a forced smile.

"Comrade Ji Xiaojun, didn't you receive training from the manufacturer before you took up the job?" Chen Zhiguo asked curiously. Normally, the operator of this CNC machine tool must be trained by the manufacturer before taking up the job. Not everyone can do it. Why would the factory have such an arrangement? Why did they have to let me teach? However, the problem of this CNC machine tool was indeed caused by reckless operation!

Ji Xiaojun said angrily, "When the manufacturer came to install the equipment, they arranged training for us. I followed them all the time when the equipment was installed. But when it came to the training class, Huang Zhiyong found an excuse to send us out. Our learning was sporadic! Moreover, Huang Zhiyong never let us practice the operation of the CNC equipment. He operated it himself and we were not allowed to move at all!"

"Then why don't you report it to the higher-ups?"

"Huang Zhiyong has a strong background. He has said that if anyone dares to disobey his orders, he will find a way to expel us!" Ji Xiaojun hesitated for a while and decided not to take the blame for Huang Zhiyong. It may also be because after seeing Chen Zhiguo's skills, he thought that if he could learn them, even if Huang Zhiyong had a strong background, he would have self-defense skills after learning the operation techniques, and it would not be so easy to touch him!

"Actually, if you want to learn how to operate a CNC machine, it's really simple. The manufacturer has sent you the instruction manual, right?"

"A little bit. However, Huang Zhiyong wouldn't show it to us. He always locked it up and took it out to check when he didn't know how to do it!" Ji Xiaojun continued to reveal. Chen Zhiguo glanced at Li Jianshe and didn't say anything else. How to deal with Huang Zhiyong was his business. I believe Li Jianshe must be ashamed to have revealed this big news in front of him today!

Li Jianshe was now filled with regret! He had not expected that Huang Zhiyong, who was eloquent, smart and studious in his eyes, would be such a person! He was also blind to choose him as the director of the CNC machine tool workshop!

At this time, he no longer cared about the old factory director's favor for his promotion. He became the factory director of this factory because the old factory director strongly recommended him to the superiors. In return, he naturally took extra care of the old factory director's nephew Huang Zhiyong. In addition, Huang Zhiyong was a man of character and eloquent, so Li Jianshe arranged him to work in the most advanced and important position in the factory, the CNC machine tool! He wanted him to work in this important position for a few years, so that he could be promoted to deputy factory director as a director, and then wait for the opportunity to complete the job continuation he had expected in his heart!

Now, there is no future. The most important thing is to save yourself. Li Jianshe said angrily, "Where is it? Take out the manual!"

"Here!" Ji Xiaojun pointed to a locked metal cabinet next to the operating table, "Someone, come and open the lock!" There were several senior fitters in the crowd. It took only seconds for them to open such a simple lock. The lock was opened in a few seconds, and Ji Xiaojun took out a thick instruction manual from it!

Chen Zhiguo glanced at the cover and said, "As long as you remember everything in it, you will have no problem operating it. With more practice, you can be as fast as me!"

Perhaps because he couldn't stand Chen Zhiguo's pretense, or perhaps because he was curious, Li Jianshe asked, "Mr. Chen, as far as I know, when the manufacturer came to install this CNC machine tool, they said it was the first equipment in the country. I want to know how you are so familiar with the equipment? Have you also worked in a machine tool factory?"

"I have never been to a machine tool factory, but I designed this equipment!" Chen Zhiguo opened the first page of the manual, which read, "Operation Manual of the First Generation of CNC Machine Tools!" There were two lines of small print below: Designer: Chen Zhiguo Manufacturer: Yanjing First Machine Tool Factory

Chen Zhiguo nodded his name, looked at Li Jianshe and Ji Xiaojun who were already stunned with astonishment, and smiled, "Director Li, it's almost twelve o'clock now. Can you arrange for us to have some lunch first? We didn't eat much for breakfast and we are all hungry!"

"Yes, yes! Look at my brain, I only think about CNC machine tools! Engineer Chen, let's go! I'll make arrangements right away. Let's go have lunch first, and then I'll arrange a place for you to stay!"

Li Jianshe pulled Chen Zhiguo and walked back. As for the CNC machine tool, as long as it was repaired, there would be no rush for production. Now that he had Chen Zhiguo, the designer, would he still be afraid of the CNC machine tool going on strike?

In fact, there is a staff canteen in the production plant, but at this time, how could Li Jianshe let Chen Zhiguo eat in the staff canteen? He really didn't expect that the superior department would send him this god-level figure, so he should serve him well and let his employees understand this CNC machine tool. If he can't complete the production tasks assigned by the superior leaders, his position will probably be unstable!

The canteen in the office area is also divided into a large canteen and a small canteen. The small canteen is no different from the large canteen in appearance and decoration, except that it is a little off the beaten track and a little quieter. The big white walls and wooden tables and chairs are all the same! In addition to Li Jianshe and Hu Weijun accompanying them, all the factory leaders of Factory 817 who were at home attended this lunch!

"This is Secretary Zhang Shuwen, this is Deputy Director Qian Yulin, and this is Deputy Director Wang Dazhuang." Li Jianshe introduced these factory leaders to Chen Zhiguo, "These two are Comrade Chen Zhiguo and Comrade Ma Huihui, who were sent by the higher authorities to support our factory's production!"

The several factory leaders who were invited must not have received the news from the production plant and were not familiar with Chen Zhiguo's deeds in the production workshop. They were a little surprised that Li Jianshe received the two young men so grandly, but they were not ordinary people. Contempt and dissatisfaction would not appear on their faces. Instead, after Li Jianshe finished his introduction, they all greeted Chen Zhiguo enthusiastically. In any case, they wanted to get to know each other first. If necessary, they could continue to deepen their relationship later. If not, it would just be an ordinary relationship between superiors and subordinates!

The secretary was the most senior, so he sat in the main seat. Chen Zhiguo wanted to sit on the outermost seat, but Li Jianshe pulled him to sit on the secretary's left! Ma Huihui sat next to him!

The whole private room is just an ordinary room, very simple, but the dishes served are very rich! Most of them are game!

After the secretary finished offering the wine, Li Jianshe stood up and said, "You may not know Engineer Chen Zhiguo very well, so I will introduce him to you. Engineer Chen graduated from Yanjing University of Technology, he is 19 years old this year, and he is not only the deputy director of the Design Department of the Design Institute of the Ministry of Industry, but also the designer of our factory, the first CNC machine tool in the country!"

If it was a college student, these factory leaders would just nod their heads. College students are good, they are educated people, but they are only 19 years old. Young people are talented, but deputy director, this should be taken seriously. Such a young deputy director, think about it, what level have you reached at your age? Deputy director, director! Two steps away, but how old is he! Especially Li Jianshe’s last sentence, everyone present put away their own little thoughts in their hearts, this is a great god! Young great god!

With Li Jianshe's introduction, the atmosphere at the scene suddenly became lively. Chen Zhiguo's wine never stopped. After you toasted, he would come. When he had time, Chen Zhiguo would toast back. When the banquet was over, except for Ma Huihui and Chen Zhiguo who were sober, everyone else was staggering! The other leaders went back to rest. Chen Zhiguo, who had not yet solved the problem of accommodation, followed Li Jianshe back to his office!

Hu Weijun helped pour some hot tea, and Li Jianshe took out a cigarette and walked around, "Mr. Chen, what do you want for your residence?"

Chen Zhiguo thought about it and decided that he didn't want to live in a tube building. The main reason was that the rooms in the building at that time were not large, and they all used floor slabs, which were not soundproof. With so many people upstairs and downstairs, it was very noisy and not quiet at all! In addition, if you cook something, the smell will spread and the whole building will know what you are eating!

"I want a quieter room. It doesn't matter if it's a little off the beaten path, as long as it doesn't disturb me while I'm reading or studying! Also, Ma Huihui is actually my fiancée, but I'm not old enough to get married yet, so I want her room to be next to mine!"

"Engineer Chen, don't you want to live in the building?" As the factory's chief steward, the factory's housing is in Hu Weijun's mind. It is the building that everyone wants to live in. It seems that Chen Zhiguo doesn't want it yet, so he wants to confirm it first, and then think about other locations!

"The building is too noisy, it's not suitable for me to live in!"

"Let me think about it!" Hu Weijun searched for a suitable house in his mind. "Mr. Chen, can a higher location be okay?"

"Higher? How high? Halfway up the mountain?"

Chapter 330 Our new home!

"Mr. Chen, come and see!" Although Li Jianshe's room was on the second floor, there was a large square in front of it. Through the window, he could clearly see the rows of houses on the hillside! Hu Weijun pulled Chen Zhiguo to the window.

"Engineer Chen, how about the row of five bungalows on the right, right in front of you, at the top?" The house that Hu Weijun introduced was at the top of the mountainside, in the last row. Chen Zhiguo took a look and found that the place was indeed very quiet. He just had to walk a little further every day, but it didn't matter. He could just consider it as exercise!