Lazy God Possession

With the completion of the last part, the skeleton and transmission of the entire power exoskeleton have been completely formed, like a fragmented bone floating in a gel. (Please see the latest chapter)

"No wonder it's called Powered Exoskeleton!" This is the common thought of everyone who sees this scene.

The metal parts suspended in the gel look very similar to human bones.

The guests here, including Qingzhong Yang, have only heard of Lazy God's 3D printing technology, but it was the first time they saw it.

The people on the Internet have only seen the process of He Qing creating and printing 3D buildings before, instead of such a delicate printing process.

The printing material sprayed from the nozzle is sprayed on the gel. It is initially a thin layer, like a gray powder covering the gel, and then more metal particles, through the "kinetic metallization" effect, with Mach 6 The above speed is sprayed onto the metal particles previously covered with a layer, and quickly combines with the previous metal particles.

The gel absorbs excess impulse and heat, and the impulse brought by the sprayed particles also causes the printed part to sink continuously, the printing process is repeated, and the metal is layered on top of one another. In the famous science fiction movie "The Fifth Element", through the genetic information contained in one hand, 3D printing was used to create a human body lens.

This process looks even more sci-fi than the special effects made in the movie.

Where the metal is in contact with the gel, the high temperature binds the metal and the gel together, just like coating the metal with a strange black protective layer.

"Papapa!" After all the bones have been printed. Ding Guocheng could not help clapping, a powered exoskeleton from the beginning of printing to the completion of printing. It's less than five minutes.

And neither they, nor the netizens who are watching the live broadcast, stared at each other for five minutes.

The whole process is very beautiful and incredible, but there is a problem now that all parts are discrete.

Dynamic exoskeleton quietly sinking in the gel. It's like breaking apart. The human skeleton placed on the dissection table must now be assembled.

How to assemble? Robot? Or take it out of the gel and assemble it manually?

It should be a robot. After all, Nanming wants to show off his skills. Manual assembly is too outdated.

Almost everyone thinks so.

At this moment, a mesh-like metal plate at the bottom of the gel lifts up the dynamic exoskeleton, and all the gel flows out of the mesh-like holes. The dynamic exoskeleton parts now placed on the plate are similar to the hands The support structure of the phalanges. The palm bones and wrist bones are all available, except for the black ones, which are more like human bones placed on an anatomical table.

How to assemble it?

Almost everyone is thinking about it.

Just then. The power exoskeleton in the container suddenly moved. It seemed to be driven by an invisible force, starting from the smallest phalanx. Of course, the phalanges of the power exoskeleton are not the structure of the human body, because it is only used to carry weight. It looks like two thick hooks.

Driven by an invisible force, the two hooks suddenly moved at the same time, and were combined with the metacarpal, with a click, the snaps between the two parts were combined.

This sudden action surprised everyone who was staring inside the container.

At the beginning of this process, it never stopped. After the two phalanges were combined, the triangular metacarpal bones began to move, just like this moment, these metal objects just printed suddenly had life.

"Kaka Kaka ..." The continuous and dense sound, which resembles the structure of human bones, and the strange self-assembly action, makes the person watching the sudden coldness of the spine and cold sweat flow out.

This ... shouldn't it be haunted!

On the opposite side of the earth, the conference site was already more than nine o'clock in the evening, and the window outside the conference was completely dark. The person in charge of the Thor company who saw this scene even erected his hairs, shaking Lingling with a chill.

More people saw this scene through the Internet, and I don't know how many people screamed in shock.

What exactly is going on?

"I see, this is the magnetic field used?" Ding Guocheng was startled just now, but he calmed down quickly, guessing.

"No, this is the laser peening and laser propulsion technology." Nanmingdao.

Just for the sake of safety, this glass facing everyone can filter out light with a fixed wavelength, and the scattered laser light is filtered out by this glass, so it looks very weird.

"Laser shot peening!" Yang Yiyi of Qingzhong: "I know this technology! The propeller blade tip of an airplane must be treated in this way! What level of laser shot peening technology has you reached?"

"Uh, a few thousand gpa." Nan Ming touched his nose. "This technology is just beginning."

Qing Zhongyang suddenly didn't want to talk anymore. He knew that the laser shot peening of a domestic research institute had just reached tens of gpa, which was commonly used in industry, but only 7 or 8 gpa.

In fact, this technology is one of the technologies that Zhang Qing showed to Nanming at the beginning.

Shot peening is a cold processing method, which is to spray a high-speed projectile on the surface of the object, plastically deform the surface layer of the object, and form a reinforced layer with a certain thickness. Strictly speaking, the 3D metal printing technology "Kinetic Energy Metallization" used by Laoshen Technology is a processing method combined with "peening treatment", so the processed parts have strong stress and high strength. Resists strong metal fatigue.

Of course, this is traditional mechanical shot peening. Compared with mechanical shot peening, laser shot peening is more efficient and more effective.

Its principle is roughly equivalent to using a high-intensity laser pulse to irradiate the black coating on the surface of the workpiece, so that the coating on the surface of the workpiece is instantly ionized, generating a strong shock wave.

Now the outer layer of the dynamic exoskeleton ~ www.wuxiaspot.com ~ is also covered with a layer of completely transparent gel. Under the constraint of the gel, this shock wave will propagate inward, and the shock wave penetrates the entire workpiece, further strengthening the strength of the workpiece. strengthen.

This process is like forging a workpiece with a hammer, but the hammer used here is a laser, and the power of forging is countless times that of humans.

Since there is a shock wave, it will naturally generate a force on the workpiece. As long as the laser in different directions is slightly adjusted, the force direction of the workpiece can be adjusted.

Countless lasers simultaneously perform "laser peening" processing on the workpiece. By the way, they also use the principle of laser advancement to push them together, which is the real reason for the weird scene just now.

In science fiction movies, laser guns can often be seen, and a hole appeared in the person who was shot by the laser gun. He fell silently to the ground and died.

But in fact, after being hit by a high-intensity laser pulse, a laser with a short thickness of the human body that has a short duration does not necessarily penetrate directly. It is more likely to hit a person, its impact and ordinary The bullet hit was very similar. (To be continued.) () "Lazy God Appendage" only represents the point of view of the author Jun. If you find that its content violates national laws, please delete it. The position is only dedicated to providing healthy and green reading platform. 【】,thank you all!