Start with a blacksmith shop.

Chapter 131 is complete.

The current design philosophy for model aircraft flight control systems is to use external simulation equipment as the control panel.

The flight control system in model airplanes is made more realistic, and there's also information exchange between the two ends.

It is entirely possible to achieve the effect of having a person on the ground controlling the aircraft while it flies in the sky.

Furthermore, for peripheral control consoles, you can simply buy ready-made ones on the market.

Once the purchased ultra-realistic simulator arrives and the transmission system between the simulator and the model aircraft is set up, then he will be able to fly this model aircraft as a real airplane.

Guo Shugui has already purchased the ultra-realistic flight simulator cockpit in the United States, and it's on its way.

The next step is to develop the flight control system for the model aircraft. Besides Li Yun, he doesn't have anyone else he can trust to do this.

So Li Yun was essentially drafted into the project, and he pulled her in to work on the development of the model aircraft flight control system.

The model airplane, which had been almost fully assembled, was disassembled again, exposing its internal structure.

This also made it easier for the two to run the wiring inside the model airplane; every movable part had a 6-square-millimeter shielded cable extending out.

These cables are like nerves, and the various movable parts are like a person's hands and feet.

Numerous cables extend from various parts of the model airplane, eventually converging at the nose.

After running through all the internal wiring of the model aircraft and converging it at the nose, they took various chips and began to build the control system.

Various blank microcontrollers of different models, as well as high-performance CPUs, were scattered all over the ground at the front of the machine.

The two also began to seriously design the flight control system for the model aircraft, soldering various diodes, capacitors, and microcontrollers onto the electronic perforated board.

Then, the control program is written onto the microcontroller, and the hardware and software of the control system are made part by part.

After the control program was tested and found to be functional, Li Zhenhua, a DIY whiz, began to formally manufacture the circuit board.

Then, according to the design, various hardware components are soldered onto the actual circuit board, and at this point, the control unit of a component is complete.

The aircraft's various control units eventually converge to form an information exchange center.

Then, this center uses a transmission system to break down and package various data and send them to the ground control console.

As for the transmission systems at both ends, he couldn't afford any advanced satellite transmission, so he opted to use civilian networks.

It's actually quite simple: just attach a large number of IoT phone cards to the model airplane, the kind specifically designed for data usage.

The data is exchanged back and forth between the console and the model aircraft.

It sounds simple, but it's actually very difficult to do.

During production, all sorts of problems kept popping up, and we solved them one by one as they arose.

Sometimes problems remain hidden until much of the work is done, and then problems arise from what was already done earlier, requiring us to go back and solve them.

In short, the process was extremely difficult, but fortunately Li Zhenhua had the virtual laboratory as a backup.

The mechanical parts took about six months to manufacture, while the electronic parts took even longer.

But for a team of two, this is already very fast.

After getting everything on the plane in order, the next step is to connect it to the simulator used for remote control, which requires getting the two devices working together.

Since the simulation chamber was purchased ready-made, and the system manufacturer provided security protection for it,

For the two people who didn't know the source code, they first needed to crack the program.

The cracking of this program was entirely done by Li Zhenhua, in a virtual laboratory!

After nearly eight months of ups and downs, the internal system of the model aircraft was finally completed, along with the transmission and ground control systems.

Right here in the center of the workshop, there is an airplane that is 3.5 meters long, 40 centimeters high, and has a wingspan of 3.6 meters.

The model airplane is very cool, with twin engines, twin vertical tails, variable-sweep wings, and the fuselage and wings integrated into one piece.

The air intakes are located on both sides of the fuselage, and the nose section looks similar to the Dragon.

As the admiral once said, any equipment must emphasize its appearance; good-looking equipment generally has no problem with combat effectiveness.

This model aircraft, whose design combines the advantages of fighter jets such as the Foton 14, Foton 22, Foton 35, Mighty Dragon, and Falcon Eagle, has an exceptionally attractive appearance.

She has an exceptionally high level of attractiveness, exuding an indescribable beauty.

Her appearance is undeniably stunning, but there's one thing that makes Li Yun want to complain.

What is it? It's the paint scheme of model airplanes. Nowadays, the mainstream airplanes are generally painted in a sophisticated gray color.

But what the hell is this thing? The nose is military green, and the fuselage is that earthy yellow color you only see on experimental aircraft.

In some places, they are even deliberately painted to have a metallic sheen, and the twin tails are painted green, making them look quite complete.

A very high-end model airplane was ruined by its paint job, turning it into a paint job that makes its origins immediately obvious.

"Your sense of humor is really something... Such a beautiful model airplane, and you actually painted it like this."

That green nose reminds me of the Eighth Prince! So tacky!

Li Yun finally couldn't hold back any longer and spoke her mind!

"Hehehe, what's so rustic about it? I'm strictly following the fighter jet manufacturing process."

This is how fighter jets are typically painted during test flights! That's called heritage!

The person opposite could only shake their head and give him a thumbs up!

In Li Yun's eyes, apart from the somewhat tacky paint job, there was really nothing else to praise or criticize about this model airplane.

The next step is to test fly the model aircraft and see how well it performs in the sky!

"Now that everything is ready, is the next step the test flight? And how come you only managed to get one out this time!"

"When you were riding motorcycles before, didn't you always ride a lot at once?"

"It's enough to get one and have some fun, there's no point in making so many!"

As for the test flight, let's wait until tomorrow. I think the weather will be good tomorrow, so let's take off on the highway outside the factory area in Shuzhen!

He didn't explain much about Li Yun's question, but just gave a vague answer to brush it off, and then talked about the test flight!

What Li Yun didn't know was that in a corner of this workshop, there was a pile of parts that could be assembled into an eight-meter-long model airplane.

That's the 3.5-meter prototype in front of them. There are larger ones and smaller ones, but he's not going to get the larger ones out yet!

A year and a half has passed since he started masturbating, and a lot has happened in that year.

His childhood friend Liu Xiaodong, this fat guy, and Wang Mei finally got married. The fat guy's father was as happy as a child weighing over 200 pounds.

Guo Shugui doesn't have a stable partner yet, only friends he gets along with. Anyway, after he started making money and his finances were no longer regulated, he became even more unrestrained in his entertainment.

He's a playboy, always having fun and never taking any responsibility, though it can be expensive.

There are many things related to him personally, starting with a series of events that happened at school.

Hujiang University of Science and Technology finally gave him an explanation: the vice-principal who had initially insisted on making him take the blame has been removed from office on charges of embezzlement and other crimes.

The school reinstated his student status and promised to keep it, and that he could receive his graduation certificate and degree certificate whenever he returned and completed the required credits.

As for the two senior leaders of the school, they were also reprimanded by their superiors because of this incident, and were also given a five-year ban on promotion, which was quite severe.

As for the controversy caused by the video he later posted that distorted history, it has finally come to an end.

Song Yigeng, Fang Fang, and other individuals who had infiltrated the education sector were subsequently found to possess enormous amounts of unexplained wealth.

During the subsequent interrogation, their mission was revealed: they were funded by foreign forces to overturn the history of Kyushu.

Starting with them, a group of such saboteurs were indeed unearthed, with the highest-ranking one of them even becoming the Director of the Education Department of Xijiang!

Luo Chuizi, Zhao Junqi, Zhang Shenshe, and others were also implicated. An investigation revealed that the issues involved were not only tax evasion but also extensive espionage activities.

The only one who escaped unscathed was Gao Xiaosong, the fat man who fled the country when public opinion turned against him.

He's currently in the US, so we can only go through the normal extradition process, but Gao Xiaosong knows too much.

It's unlikely the US will agree to extradition, and even if they do, something unexpected might happen before he returns.

The matter concerning the school has now been completely resolved.

During this year and a half, their company added another top-selling product: snowmobiles.

Especially after the Antarctic expedition team returned from Antarctica, the largest purchases of snowmobiles were made by foreign expedition teams and snow amusement parks.

As for their company's business of supplying aero-engines to Hongdu, production is gradually increasing.

Hongdu's small business jet has made a name for itself internationally and is selling extremely well.

Their production wasn't all supplied to the Camel Kingdom; another 30 percent was bought by wealthy individuals who needed these small business jets.

In contrast, Hongdu's aircraft production is increasing, and their engine production is also increasing; it can be said that supply cannot meet demand.

Moreover, there is still demand for their engine in the market, mostly from small aircraft manufacturers.

The engines have gained another sales channel, but their production volume has become a factor restricting sales.

During this period, he also received orders for custom-made watches, but he turned them all down.

All the orders came from Yao Qiang's recommendations, but he really had no interest in getting involved with the watches.

So much happened in a year, and he didn't take some of the trivial matters to heart.

(End of this chapter)