I forged swords at Lingjian Mountain.

"Senior Brother, can we now confirm that Huiyue is merely bloodthirsty, not indiscriminately killing, right?"

Nie Shuang breathed a sigh of relief.

Lin Kong nodded.

Lin Huiyue did not slaughter the entire Zhang family of Baishuofang.

Her main purpose was to kill Zhang Chen and Zhang Li.

of course.

She showed no mercy to those who tried to stop her.

However, after killing Zhang Chen and Zhang Li, she did not continue the killing. Instead, she ordered the people from Zhang's Hundred Forging Workshop to take out a large amount of materials from their inventory and send them to Lin Jianmen.

Lin Kong was quite satisfied with how Lin Huiyue handled the situation.

At the same time, they gradually realized that Lin Huiyue's murderous nature was probably more directed at those who were hostile to the Lin Jian Sect.

People like Lin Huiyue, who have been unable to speak since childhood, are often quite sensitive and stubborn.

She valued Lin Jianmen more than her own life.

Now that Lin Kong has put her in charge of the safety of the Lin Jian Sect, she reacts even more strongly to those who attempt to harm the sect.

Even someone as powerful and influential as Wei Xun would be met with her sword if he did anything to harm the Lin Jian Sect!

It can be said that any enemy of the Lin Jian Sect would arouse the bloodlust in her bones.

In this way, Lin Kong would no longer need to think about restraining her bloodlust by forging swords.

On the contrary, we can use her bloodthirstiness to forge a more powerful sword that is more suited to her in the future.

Now, with the abundant casting materials brought back from Zhang's Hundred Forging Workshop, the current shortage of materials in Linjian Sect has been greatly alleviated.

However, Lin Kong thought he still needed to forge the Qingfeng Sword as soon as possible and reach a cooperation agreement with the Qingjian Sect.

After all, the reinforcement of the various buildings in the sect will require a lot of swords.

The training of Nie Shuang and the other two should not be limited to swordsmanship.

Both their internal strength and physical body need to be enhanced, and we also need to find ways to let them practice more techniques and movement methods.

All of these training programs require funding.

Purchasing materials for sword making in the future will also be a considerable expense.

"The Linjian Sect is indeed too poor right now..."

"We must quickly forge the Qingfeng Sword to open up a stable source of income from the Qingjian Sect."

The day.

Lin Kong then began forging the Qingfeng Sword using materials he brought back from Zhang's Hundred Forging Workshop.

The Qingfeng Sword has very high requirements for materials.

Don't be fooled by the fact that forging a Qingfeng Sword only requires three materials.

But all three materials... must be the finest materials!

For example, the Qingfeng Copper used to forge the Qingwen Sword is also the same material used to forge the Qingfeng Sword, but it cannot be ordinary Qingfeng Copper. Instead, it must be the finest Qingfeng Copper that has undergone multiple forging processes!

This involves the issue of material casting.

Back when Lin Kong was in the game.

The life skills related to forging alone are divided into many categories—

For example, sword casting, knife forging, armor casting, and material smelting.

These are all life skills that have been categorized separately.

This led to the emergence of forging-related professions such as swordsmith, knife forger, armor maker, and material maker.

A foundry of a certain scale, like Zhang's Hundred Forging Workshop, would have swordsmiths who specialize in forging swords, knifesmiths who specialize in forging knives, and material makers who specialize in forging materials.

Among them, the foundry master is especially important!

After all, whether it's a swordsmith or a bladesmith, when forging those powerful swords, they all need a material craftsman to help them refine superior materials.

Under normal circumstances, a casting craftsman needs at least 8-10 pieces of ordinary [Azure Copper] to forge a piece of [Refined Azure Copper].

However, if the craftsman is highly skilled, he can forge it with just 5 pieces of [Azure Copper].

The higher the casting skill of the casting engineer, the less material loss will occur during casting.

of course.

The higher the grade of the material, the more difficult it is to forge.

Therefore, in many foundries, the status of the material casting master is often no less than that of the sword casting master or the knife forging master.

However, for Lin Kong...

He doesn't need to find those foundries outside to forge materials.

It is a divine artifact capable of creating all things.

If he were in the game right now, he could see it clearly...

All of my forging-related skills, whether it's sword making or knife forging, have reached the maximum level!

This also includes... casting materials!

Lin Kong picked up a piece of [Azure Bronze] and clenched it in his hand.

Click!

A dense white light suddenly emanated from the piece of [Azure Edge Copper], and large fragments fell off continuously, leaving only a piece of [Refined Azure Edge Copper] with a pure texture and a faint blue luster in the blink of an eye.

Even the most skilled [Stone Caster] usually needs at least 5 [Azure Copper] pieces to forge one [Refined Azure Copper].

This is common sense.

However, Lin Kong only needed to casually grasp the raw materials to forge them into superior refined materials!

And all his creations will be 100% successful!

There will never be a situation where failure occurs.

This is something that even those who have reached the maximum level in forging skills cannot do.

that's it.

In the blink of an eye, Lin Kong forged the three superior materials for the [Qingfeng Sword].

He then raised his hand, clenched his fist, and tapped the three superior materials.

hum!

A white light flashed.

The three materials quickly fused together, transforming into a slender, elegant longsword with smooth lines, resembling a willow leaf.

"...With my current forging abilities, there's no countdown left for forging the [Qingfeng Sword]."

Lin Kong's gaze was intense.

After realizing that my growth value had exceeded 10%, I felt like I had undergone a great transformation.

The improvement in casting capabilities is quite remarkable.

According to this schedule.

I estimate that once my growth value reaches 20%, I can start forging those cultivation techniques and movement methods!

Lin Kong was quite looking forward to it.

He picked up the Qingfeng Sword in front of him.

The Qingfeng Sword is quite ordinary in appearance, and it has some similarities to the Qingwen Sword.

The main feature of the blue-patterned sword is the blue patterns on the blade that can cause visual interference.

The Qingfeng Sword, on the other hand, has unique "wind and cloud patterns" engraved on both sides of its blade.

These patterns are not merely decorative; rather, they guide the airflow smoothly as the sword cuts through the air at high speed, significantly reducing air resistance and wind noise, allowing the sword to break through conventional limits.

of course.

The biggest difference between the Qingfeng Sword and the Qingwen Sword lies mainly in their internal components.

The Qingfeng Sword is a sword that emphasizes its internal structure.

This unique structure allows internal energy to flow more smoothly within the sword, reducing energy consumption while unleashing greater destructive power.

Especially when combined with the core technique of the Qingjian Sect—"Qingfeng Jue".

That is the strongest form of the [Qingfeng Sword]!

After all, the Qingfeng Sword was originally a weapon forged according to the Qingfeng Manual!

Only in the hands of the Qingjian Sect can the Qingfeng Sword unleash its true power; even if others obtain this sword, they will not be able to make much of a difference.

This is also why the Qingjian Sect can freely hand over the blueprints for the Qingfeng Sword to others without fear of leakage.

They desperately want more people to forge the Qingfeng Sword.

Lin Kong compared the Qingfeng Sword in his hand with the Qingfeng Sword that the Qingjian Sect had left behind as a reference.

You can clearly feel that the two are completely different in terms of both workmanship and quality!

Compared to the Qingfeng Sword in his hand.

The Qingfeng Sword left behind by the Qingjian Sect is a completely worthless and inferior product.

Lin Kong immediately called Wang Tiancong over.

Tell him to deliver both of the Qingfeng Swords to the Qingjian Sect at the same time.

He then went to the warehouse and took inventory of the materials currently inside.

As the largest foundry in Huanfeng City, Zhang's Hundred Forging Workshop had a considerable amount of materials seized from them this time.

Lin Kong estimated that these materials should be enough for him to continue forging the [Mist-Hidden Sword Wall] and to incorporate some swords into the [Spiked Sword Wall].

He first forged thirty Azure Pattern Swords with a sturdiness bonus and ten Azure Pattern Swords with a sharpness bonus in one go.

Then, they went behind the Spiked Sword Wall and, right next to it, forged the Mist Concealed Sword Wall.

He also incorporated ten sharpened [Azure Pattern Swords] into the [Spiked Sword Wall].

laugh!laugh!laugh!

One after another, incredibly sharp sword blades shot out rapidly from the surface of the wall, their cold light flashing.

Lin Kong can adjust the orientation and position of these sword blades at any time.

However, considering the vast area of ​​the sword wall...

Ten sword blades alone have a very limited range of effect; more swords need to be incorporated to achieve the desired effect.

"Given the sharpness of the Azure Pattern Sword, once the Mist-Concealed Sword Wall forms and obscures these blades... even assassins like the Blood Blade Four Ghosts, skilled in assassination, won't be able to cross this sword wall!"