Rebirth 08: Rise from copycat phones

Chapter 311 The Future Trillion Dollar Market

Xu Shenxue controlled the entire semiconductor equipment and material research and development system of Xiannvshan Holdings, and even used his own connections, influence and other resources to accelerate the large-scale production of DUV immersion lithography machines.

This has increased the mass production speed of Gulf Technology's HDUV-400 lithography machine.

"This year, we will ensure that at least 400 mass-produced HDUV-500 lithography machines are provided to domestic chip manufacturers for their chip production. At the same time, we will produce at least five trial production models of HDUV- lithography machines for testing and R&D work of Zhiyun Microelectronics and SMIC!"

"In order to ensure this, we will further increase our efforts in recruiting and training personnel!"

Wang Daolin, CEO of Gulf Technology, described to Xu Shenxue the production and R&D situation in the field of lithography machines this year.

"We have initially solved the overlay accuracy problem of the 500-type lithography machine. In the subsystem test, we have been able to achieve a stable accuracy of nanometers, which can support the mass production of the -nanometer process."

"Next, we will try to produce a prototype for whole-machine testing, and start delivering the first test prototype to Zhiyun Microelectronics in the third quarter!"

"In the further development of lithography machines, we are working on an overlay accuracy of 600 nanometers to support the model of the -nanometer process in the future. Although we have encountered some technical difficulties, we are stepping up our efforts to tackle the technical problems of the transition. We will strive to solve this technical problem in the next two years."

"As long as we solve the technical problem of 2.5 nanometer overlay, our lithography machine will be able to perform efficient, high-yield quadruple exposure, and the high-yield quadruple exposure technology can be used for large-scale mass production of the equivalent of a 7-nanometer process!"

"Although there is still a certain technological gap between us and ASML, this technological gap is not insurmountable. After all, we have solved the most difficult parts of lenses and light sources, and also solved the problem of double workbenches. Now we just need to proceed steadily, continuously optimize the technology, and gradually improve it, so that we can gradually improve the overlay accuracy!"

Xu Shenxue said: "It seems that our DUV immersion lithography machine should be stable, and the 7-nanometer process will not be a big problem in the future."

"What about processes below seven nanometers? Can the 600-type lithography machine we are working on break through the limits and produce chips equivalent to five nanometers?"

Wang Daolin said at this time: "The 134-nanometer process is not a big problem, and the 5-nanometer process can theoretically be used through multiple exposures, such as eight-fold exposure, using the -nanometer wavelength light source of the existing DUV immersion lithography machine to manufacture chips equivalent to the -nanometer process."

"But this requires the lithography machine to provide higher overlay accuracy, so that it can align the chip for exposure each time during multiple exposures."

"If the overlay accuracy is not enough, then alignment will not be possible during multiple exposures, and the chip yield will be extremely low."

"According to our calculations, the 600 nanometer overlay accuracy of the -type lithography machine is already at the limit for maintaining the -nanometer process in mass production. Even if all other conditions are ideal, it is estimated that the yield rate can only be around %. And this is still theoretical data. If affected by other factors, the actual production may not reach this yield rate."

"If we want to use a 600-type lithography machine to force production of chips equivalent to a five-nanometer process, it is not impossible. In theory, this is possible, but our 600-type lithography machine is not accurate enough in overlay. If we force production, the yield will be very low and it will have no commercial value at all!"

After hearing this, Xu Shenxue did not show any frustrated expression, but continued to look through the technology, and then said: "If the 7-nanometer process can be solved, it will be good."

"As for the 5-nanometer process, let's not talk about the low yield and low commercial value. The key is to solve the problem of whether it exists or not. We must ensure that even without EUV lithography machines, we can obtain a certain 5-nanometer process capacity, even if it is extremely costly!"

Xu Shenxue attaches great importance to this equivalent five-nanometer process... In the absence of EUV lithography machines, if we want to further break through the process, we need to explore the limits of DUV immersion lithography machines.

It's not just a problem on our side. Intel, TSMC, and other big companies on the other side also have the same problem... because they don't have EUV lithography machines available!
In the original time and space, they could directly use EUV lithography machines to work with seven nanometers or even five nanometers, but in this time and space... Xu Shenxue smiled and said to them: I can't use it, and you can't use it either!

You can't start running ahead, this is not a decent thing to do!
If you are not decent, I will help you to be decent!
As for whether there are rules or not, it concerns the electronic consumer and semiconductor market worth hundreds of billions of dollars, behind which is the entire electronic consumer and semiconductor industry chain, affecting tens of millions of jobs...

rule?

My rockets are the rules!

Now just stay where you are and play with the DUV immersion lithography machine with me... Then we will each figure out how to use the DUV immersion lithography machine to produce seven-nanometer or even five-nanometer chips!
This is fun, isn’t it!

At this time, how to use DUV immersion lithography to further advance the process has become a very important issue.

In fact, starting from 28 nanometers, semiconductor manufacturers have already begun to address this problem and solve it, using technologies such as double exposure and 3D transistors.

These are all aimed at further reducing transistor size and increasing transistor density within the limits of the 134-nanometer light source wavelength of existing DUV immersion lithography machines.

Zhiyun Microelectronics is no exception and started working on multiple exposure technology and 3D transistor technology early on.

The 3-nanometer process currently in trial production uses double exposure and D transistor technology.

However, double exposure cannot produce the equivalent of seven-nanometer process. What should we do?
Zhiyun Microelectronics has proposed a more complex multiple exposure process. To put it simply, they want to make a big move and directly implement quadruple exposure technology to forcibly achieve mass production equivalent to 7 nanometers.

However, the multiple exposure technology requires the support of the overlay accuracy of the lithography machine.

This is also the reason why Gulf Technology continues to focus on overlay accuracy. After the HDUV-400 and 500 models, it quickly launched the 600 model.

At this time, Wang Daolin said: "If we must use DUV immersion lithography machines to produce 600-nanometer chips, according to our calculations, if we do not consider the yield problem and the cost, we can barely produce some chips equivalent to the -nanometer process using the -type lithography machine."

"If we consider the cost and commercial application, we need to develop a lithography machine with an overlay accuracy of 1.5 nanometers at least, so that the yield rate can be controlled within a certain range."

"But the overlay accuracy of the 1.5 nanometer process is too difficult. We plan to use an EUV lithography machine to achieve this overlay accuracy, and it is a second-generation EUV lithography machine!"

"The first generation of EUV lithography machines we are planning will be designed with an overlay accuracy of two nanometers, and the design indicators are mainly used for production equivalent to the seven-nanometer process."

"The planned second-generation EUV lithography machine will use an overlay accuracy of 1.5 nanometers, and then achieve an equivalent 5-nanometer process node!"

Listening to Wang Daolin's words, Xu Shenxue said: "We still need to speed up the research and development of EUV lithography machines and strive to produce a prototype within three years!"

Wang Daolin said: "As for the prototype, we do have some confidence, but it will probably take a long time for it to be fully practical!"

"At present, we still have a lot of technical problems to solve in the technological advancement of EUV lithography equipment."

"The light source part is relatively easy, because we have obtained a lot of foreign EUV light source technology, and even have a complete design plan for the entire light source system. However, even the relatively easy light source part is very troublesome for us to do now."

"Although we have obtained a complete EUV light source design, we do not have the corresponding equipment, materials, and processing technology to manufacture it."

"Nowadays, in the field of light sources, we are like a skilled cook without rice, but it is difficult to cook without rice. We have many plans, but all of them cannot be implemented due to lack of materials or parts!"

"For this reason, we have been forced to revise the design six times, lowering the technical requirements time and time again, or using other methods to meet the technical requirements!"

When Wang Daolin said this, he couldn't help but sigh: "Although we have been catching up very quickly in recent years, their decades of technological accumulation are not so easy to catch up with!"

Xu Shenxue said: "It has taken them decades to accumulate knowledge. It is difficult for us to catch up in a short period of time."

"But don't be discouraged. We Chinese people should believe that our brains are smart enough to accomplish many seemingly impossible tasks!"

You may not believe in anything else, but you can believe in the ability of the scientific research system, but you cannot say that.

So Xu Shenxue said: "It only took us a few years to develop this DUV immersion lithography machine. Although the EUV lithography machine is more difficult, it does not mean that it cannot be developed!"

“Have faith!”

At this time, Wang Daolin also laughed and said, "Boss Xu, you are right. I am still obsessed with this aspect!"

"Speaking of the issue of catching up, because our foundation in the field of light sources is relatively poor, the light source power that can be achieved in the laboratory is not enough and cannot reach the level of ASML. On the one hand, we continue to increase the light source power, and on the other hand, we also use other technologies to reduce the loss of light source power in the reflection process, so that the relatively low-power light source system can also meet production needs!"

"During this process, our engineers have also made considerable technological progress. We have tried to use dual mirrors to focus and collect light sources, which is simpler than the six-sided mirrors used by ASML and reduces the loss of light sources. This not only means that the dependence on the power of the light source system can be greatly reduced, but also it can greatly save energy consumption and further reduce the cost of chip manufacturing."

"This is a very promising technological breakthrough. We are currently conducting in-depth research and development on the double-sided mirror technology!"

Xu Shenxue laughed and said, "That's right. This is the attitude we need when doing technology research and development. Don't get stuck in a dead end or forcefully copy others. It doesn't mean we have to do it exactly as others do it."

“You must be able to step out and look at the problem, find the problem, and then solve the problem!”

Xu Shenxue is generally satisfied with the technological advancement progress of Gulf Technology. Although the EUV lithography machine is a bit troublesome to set up, they have already proved their strength in the field of DUV immersion lithography machines.

After appeasing the management and core technical personnel of Gulf Technology, Xu Shenxue returned home.

As soon as he got home, his son Xu Wenbai, who could already walk, ran up to him, wobbling on his short legs, shouting, "Daddy, hug me..."

Xu Shenxue squatted down, picked the child up, and teased him with his face close to his own, making the child giggle.

At this time, Lin Yaxian also came out and said with a smile: "He is very smart now. As soon as he heard the voice, he knew it was you who came back!"

Xu Shenxue walked inside holding the child in one hand: "It seems to feel heavier!"

Xu Wenbai is now chubby, with a round face and a strong build.

Lin Yaxian said: "He ate too much before, and he had a good appetite, but you always let him eat so much complementary food. Some time ago, the doctor said that he had some overnutrition and he should pay attention to the risk of obesity. I have asked the nutritionist to adjust his nutritional intake!"

His son was only a few months old before he started eating complementary foods. He was fine, but after he started eating complementary foods, he had a very good appetite and liked to eat everything. The two new parents were also happy to see him eat a lot.

As a result, his family doctor said some time ago that he had consumed too much nutrition... and was at risk of obesity, which made Lin Yaxian a little worried.

Xu Shenxue carried the child into the house and started playing with the child directly on the carpet. Lin Yaxian, who was sitting on the sofa, looked at the father and son with a faint smile on her face.

She likes to see Xu Shenxue playing with his son, which makes her feel happy.

After playing with the children for more than an hour and the family having dinner, Xu Shenxue went to the study upstairs to do some work.

Today is the era of paperless office, and the companies under Xu Shenxue are basically high-tech companies, and they have implemented it more thoroughly in this regard.

After turning on the computer, Xu Shenxue began to review some work emails.

He receives a lot of work emails every day, some of which are just daily matters, while others are more important.

Hailan Automobile sent a report about the upcoming launch of new models, and plans to hold the annual launch conference in mid-May.

At the launch conference of HaiLan Automobile this year, it was announced that the technology upgrades would be made to the three existing models, namely the coupe model HaiLan SEC; the SUV model HaiLan SEV; and the luxury sedan model HaiLan SLC.

On the other hand, a new mid-to-high-end sedan will be launched to the market to further seize the mid-to-high-end sedan market.

Xu Shenxue has always attached great importance to Hailan Automobile and is very optimistic about the development prospects of the field of smart electric vehicles.

Although the electric vehicle market is still relatively small, the annual sales of Hailan Automobile, Tesla, BYD, and other miscellaneous new energy vehicle companies, or electric vehicles (including pure electric, plug-in hybrid, and extended-range) from traditional car companies are only around one million.

But Xu Shenxue knew that it would not be long before this number would surge to tens of millions, or even fifteen million!
The market size is expected to reach 800 billion US dollars in ten years. Even with the boost from Xu Shenxue's HaiLan Automobile, it is possible for the entire smart electric vehicle market to exceed one trillion US dollars.

This is a market that is comparable to the smart terminal field, or even larger.

Must pay attention!

In this big wave, Xu Shenxue, on the one hand, promoted the development of the entire electric vehicle industry chain, invested in lithium mineral resources, invested in the field of power batteries, and promoted the rapid development of the entire industry chain, and even liberalized the authorization of some technical patents.

On the other hand, we also pay great attention to Hailan Automobile, a terminal electric vehicle manufacturer!
The next day, Xu Shenxue went to Hailan Automobile for inspection and saw the upgraded versions of three existing models.

The changes in appearance are not that big, and the design language of each model is still maintained, with a sci-fi feel as the main feature.

Then it was upgraded and improved with many small functions, many of which looked advanced but were actually useless. Of course, the most core upgrades were the technical upgrades in the two core areas of battery life and assisted driving.

HaiLan Automobile is not standing still, but continues to research, develop and upgrade its core technologies.

Bao Yongyan said to Xu Shenxue: "In the past one or two years, we have also made considerable technological progress in some core areas!"

"In the battery field, we have improved and upgraded our battery technology, which has increased the energy density of the battery pack by 15% again. At the same time, we have adopted a new generation of battery management technology, which is not only safer, but also has higher charging efficiency and better discharge management!"

“At the same time, we have also made certain technological breakthroughs in energy recovery technology, and have applied it to this year’s models!”

"The application of many new technologies has enabled our models to achieve a longer pure electric range. This year's flagship version of the Hailan SEC will be able to reach a pure electric range of 480 kilometers, which is 80 kilometers longer than the first-generation Hailan SEC. At the same time, the cost of our new generation of batteries is even lower than that of the first-generation Hailan SEC."

"This is a very difficult technical achievement for the lithium iron phosphate battery we use!"

"After all, the lithium iron phosphate batteries we use are relatively safer than ternary lithium batteries, but their energy density is slightly lower. Now we can achieve this level of pure electric range while using lithium iron phosphate batteries, which is a huge technological breakthrough!"

In fact, both types of lithium batteries are quite dangerous. Once the batteries are deformed, they can easily short-circuit and catch fire.

Lithium iron phosphate batteries are safer, but that's only relatively speaking!

The difference between the two batteries is quite large. Compared with ternary lithium batteries, lithium iron phosphate batteries have a longer cycle life; fewer rare materials and therefore lower costs; and they are safer;
However, the energy density is lower, the charging and discharging speed is slower, and it is not cold-resistant, so it is awkward to use in the north!

Ternary lithium batteries, on the other hand, have a shorter service life, higher cost, and poorer safety, but they have a higher energy density, can achieve a longer battery life, have a faster charge and discharge speed, so they charge quickly, provide more power, and have better cold resistance, making them more suitable for use in the north.

For car companies, they choose to use it based on many considerations such as vehicle positioning and cost. There is no saying which one is better. The two power batteries have their own advantages and disadvantages.

Xu Shenxue said: "This improvement in pure electric range is great, and it can further increase the use scenarios of our electric vehicles!"

Bao Yongyan said: "Yes, the range anxiety of electric vehicles is too great. Although the sales of our pure electric models are OK now, the sales proportion of extended-range versions is getting larger and larger. After all, the pure electric range of our extended-range versions is not low, which can meet the needs of daily short-distance travel. When traveling for long distances, you can use the extended-range mode to refuel directly to avoid range anxiety!"

"However, we estimate that as charging piles become more popular, especially on highways, and as pure electric range increases and charging speeds get faster, the sales proportion of our pure electric models will increase. This is an inevitable trend in the future, and we will continue to invest in these areas!"

Bao Yongyan then introduced some other technological advances, such as more intelligent assisted driving, which is more important for Hailan Automobile.

Because HaiLan Automobile is not just an electric car manufacturer... HaiLan Automobile is engaged in smart electric cars. It can even be said that "automatic assisted driving technology" is the core selling point of HaiLan Automobile, and many other messy things are just icing on the cake.

In the eyes of outsiders, Hailan Automobile is directly associated with autonomous driving.

Therefore, Hailan Automobile attaches great importance to the advancement of assisted driving technology.

Bao Yongyan said: "Since last year, we have cooperated with Zhiyun Semiconductor to design and develop a new generation of intelligent driving chip 'YEQ2'. The chip is manufactured using the automotive-grade -nanometer process. Each chip contains a CPU, GPU and AI acceleration chip. Not only does it greatly improve computing power, but it can also perform AI learning more effectively."

"The computing power of a single chip reaches 1 TOPS, far exceeding our first-generation YEQ chip."

"Based on this chip, we designed a new assisted driving platform. It uses four YEQ2 chips and combines them together to provide TOPS of computing power. It is then combined with multiple cameras, millimeter-wave radars, and ultrasonic radars to form a multi-sensor assisted driving solution, which can achieve a higher level of assisted driving!"

"Our new generation of advanced automatic assisted driving function has made great improvements in performance compared to the previous generation. To a certain extent, it can even be said that it has achieved most of the automatic driving, and there is no problem in positioning it at L3!"

"Of course, there are still certain legal risks, so our new generation of advanced automatic assisted driving technology will be promoted as L2++."

The standard automatic assisted driving of the previous generation of Hailan cars was advertised as L2, and the advanced automatic assisted driving was advertised as L2+.

Now that it has been upgraded, let’s add another + sign!
As for using the term L3 directly, that is impossible... Before countries around the world have perfected the corresponding laws and regulations on autonomous driving, Hailan Automobile will never promote its autonomous driving technology as L3 level, or any autonomous driving technology, in order to avoid legal risks.

All along, Hailan Automobile has insisted in all its official publicity that its technology is "automatic assisted driving technology" and "advanced automatic assisted driving technology".

It is an upgraded version of L2 assisted driving technology!
But there was no mention of autonomous driving.

Although HaiLan Automobile is able to achieve autonomous driving to a certain extent, HaiLan Automobile officials have never admitted it.

Anyway, Hailan Automobile only provides you with an 'advanced automatic assisted driving' function. You can use it however you like, at your own risk!

Otherwise, it will bring extremely troublesome legal risks, enough to cause Hailan Automobile to go bankrupt!
This year, Hailan Automobile will have a comprehensive technical upgrade of automatic assisted driving technology: L2++
Bao Yongyan continued: "This year, our new battery technology, battery management technology, and upgraded L2++ technology will also be applied to our luxury mid-size sedan 'Hai Lan SLMC'."

"After we launched the luxury large sedan last year, it received wide acclaim in the market. However, due to its high price and its positioning in the business market, the overall sales volume is not large. So far, only more than 8,000 units have been sold."

"For a large luxury sedan, this is a successful model, but the overall sales volume is too low to bring us enough revenue and profit. It can only be regarded as a price anchor model to enhance the brand and reputation!"

"In the second half of last year, we completed the research and development of a new generation of mid-size vehicle platform, and built the new generation of Hailan SEC and Hailan SEV on this new mid-size platform. At the same time, we also used this platform to build a luxury mid-size sedan."

"This luxury mid-size sedan is mainly positioned as a family car, and also has some business attributes. It is used to compete with the BMW 5 Series and other models priced at RMB or on the market, in order to expand the product line and supply different customer groups."

Following Bao Yongyan's explanation, Xu Shenxue also walked into a test site and saw the luxury mid-size sedan Hailan SLMC.

The whole car looks smaller than large luxury sedans such as the Hailan SLC, but the body is still relatively large, with a length of five meters. The body design also incorporates some characteristics of coupe models such as the Hailan SEC. It looks stable and mature, but also has a younger sci-fi feel.

Xu Shenxue thought that the designer of this car should have combined the Hailan SLC and Hailan SEC together to create a hodgepodge.

It attempts to combine both luxurious and youthful sci-fi design elements.

Judging from the appearance, it feels pretty good for Xu Shenxue.

At this time, Bao Yongyan said: "The appearance of our car was selected from more than a dozen design proposals. It mainly took into account the design aesthetics of our domestic consumers, and also took into account the design aesthetics of some North American consumers!"

"Because we found that our domestic car consumers have good aesthetic tastes. The SUV models we designed based on the appearance aesthetics of domestic consumers are not only popular in China, but also in the North American market. They have also received unanimous praise in West Asia and even Europe!"

"Relatively speaking, some of the car models we designed for European consumers were not well received in the domestic and North American markets during our investigations."

Xu Shenxue said: "The industrial aesthetics of domestic consumers is still very online, especially in emerging technology products such as smart electric vehicles. This is not only true for cars, but also in the field of smart terminals. Our Zhiyun S14 mobile phone is a typical example. It is a mobile phone designed according to the aesthetics of the Chinese people, but it is also widely welcomed around the world!"

Bao Yongyan said: "That's true, so the appearance design of our new models has focused on the aesthetic tastes of domestic consumers."

The aesthetic standards of Chinese people these days are actually quite good. It can even be said that they have surpassed the aesthetic standards of Europe, the United States and other regions.

This can be seen from the electric cars in the original time and space... A large number of new energy vehicle models designed for domestic consumers, when placed abroad, are also top-notch in appearance and are well received by overseas consumers.

At the same time, the many new gadgets and small functions in various domestic electric vehicles have greatly shocked foreign consumers whose minds are still stuck in the last world.

It’s a pity that no matter how good the domestic electric cars in the original time and space are, you are not allowed to sell them and will be subject to all kinds of tariffs!

Of course, this problem has not yet arisen in the current era of the rise of Hailan Automobile. Not to mention markets in other regions, it can easily enter the US market, and the tariffs are extremely low.

Because the domestic market is still dominated by major foreign brands, if they want to occupy your market, they will naturally open up the market to you... Just look at the sales volume of Hailan Automobile of hundreds of thousands of vehicles this year, and they still don't take it seriously.

So, at this moment they will continue to shout for free trade!
However, once more domestic electric vehicle manufacturers emerge and eliminate foreign brands in the domestic market, the corresponding markets such as Europe and the United States will most likely begin to impose various tariffs, investigate anti-dumping, anti-subsidy, etc.!

By then, we will be the ones shouting for free trade!

The cycle of life and death is nothing more than this!

In this regard, Xu Shenxue will also make some preparations. In the field of electric vehicles, don't count on the American market. The relationship between Xu Shenxue and the opposing consortium is too strained. The other party is on guard against Xu Shenxue everywhere. Now they are turning a blind eye, but it will be unlikely in a few years.

It is only a matter of time before Hailan Automobile is forced to leave the US market, there is no doubt about it!
However, the markets in Europe and other regions can still continue to stabilize through some exchanges of interests, such as through some technical cooperation, establishing assembly plants locally, and then allowing the other party to exchange market for technology, etc.

What foreign automobile manufacturers did in the country back then, Xu Shenxue could also do abroad.

Everyone wants benefits, and gaining market share through certain exchange of benefits is the only way.

After seeing the luxury mid-size sedan Hailan SLMC, Xu Shenxue did not stay in Hailan Automobile for too long. He returned to Zhiyun’s headquarters in the afternoon to hold a meeting and then talked with the heads of some business departments.

I also met Yang Pinglin, the former president of the European region, who was previously seduced by a US financial group in Europe, which led to a scandal.

Yang Pinglin looks a little haggard now!

After the scandal broke out in Europe, although it was calmed down under the protection of the group's legal department, he could no longer serve in the European region and was called back to China by Xu Shenxue for cold treatment...

This cold treatment is actually an explanation to foreign consumers, but Xu Shenxue couldn't really give it a cold treatment.

As for not employing him or even firing him because of the scandal...that's impossible.

This scandal seems to be caused by him himself, because of problems learning a foreign language...but there is an American consortium behind it. If there is not only a honey trap, there is also a car accident, a frame-up, and all kinds of things.

After all, this was a fight between Xu Shenxue and the other consortium, and Yang Pinglin, as Xu Shenxue's subordinate, was also on the front line, and then was subjected to targeted attacks.

This is not an isolated case. In fact, in the past few years, especially in the past two years, several Zhiyun executives who encountered various problems during this turmoil have been imprisoned abroad, and an executive president in charge of overseas semiconductor business was seriously injured in a car accident last year.

Although there is no clear evidence that the American consortium was responsible, Galaxy Security has judged based on various circumstances that this was definitely not a natural accident, but a deliberate man-made accident, but there is no clear evidence.

You, Xu Shenxue, have Galaxy Security under your command, and you can use various physical sanctions... The American consortium also has a security team, and they can also frame others and use various physical sanctions.

You come and I go, this is the norm!
The two sides are engaged in such a fierce business war, and the senior management under Xu Shenxue are being targeted by the enemy, and you, Xu Shenxue, are adding insult to injury. Who the hell will follow him in the future!
Especially for overseas business, who would dare to go there in the future?
Everyone knows that it is high risk for Zhiyun executives to work overseas.

When Zhiyun executives travel overseas, they have to ride in bulletproof cars with bodyguards in front and behind them.

If something goes wrong and the group doesn't protect you and provide sufficient support, who the hell would follow you, Xu Shenxue?
Once people's hearts are scattered, it is very difficult to gather them back!
Now, more than three months have passed, and the public opinion storm against Yang Pinglin in the outside world, mainly in Europe, has subsided. At this time, Xu Shenxue also called Yang Pinglin over.

After sitting down on the sofa, Xu Shenxue said, "Old Yang, it's almost time to rest now, so you can come back to work. What are your plans?"

Yang Pinglin, who is in his forties, was silent for a while, then said, "Three months of rest is enough. If I don't work any more, my old bones will probably rust!"

"As for future plans, I'll listen to Director Xu!"

Xu Shenxue said: "It's not like I have to decide what to say. Let's discuss it together and tell us what you think!"

Yang Pinglin has also worked with Xu Shenxue for several years. As a member of the group's vice president, he naturally has some understanding of Xu Shenxue's personality. When he asks you to express your ideas, you don't have to push it back and forth or beat around the bush...

This is not to say that Xu Shenxue has a good personality, but everyone around Xu Shenxue knows that Xu Shenxue is actually very strong: just say what you are told to say, don't waste time!
Xu Shenxue is so busy every day, how could he have the time to hang out with you!

Yang Pinglin thought for a few seconds, then said fiercely: "My idea is, I have to get up from where I was tripped, and then kick the other person to the ground!"

"Boss Xu, I still want to go overseas!"

Xu Shenxue said, "Okay, since you have this idea, I will help you. You can't go to Europe, but you can still go to America. I'm going to transfer Old Li from the South American region back to take up his post. You will take over as the president of the South American region and give them a good beating for me!"

(End of this chapter)