The Void Walker in American Comics...

Chapter 10 Equipment
Since coming to the laboratory, Mu En has been spending every day in it, almost treating it as his own bedroom.

One evening, after tightening the last screw, he relaxed.

"Ah~" He stretched in the chair, and his body stretched out with a crisp sound. Mu En leaned back on the back of the chair and said, "Finally done!"

He has been making these parts for so many days, and he has carefully debugged each one of them, so that he can manufacture the equipment in one go.

"Where should we start?" Mu En rubbed his stubble as he looked at the parts on the table. "Let's start with the virtual energy device!"

After saying that, he picked up the parts of the virtual energy device and began to manufacture it.

Originally, the nullifier was the main component of the nullifier drone, which could expand the coverage of the nullifier shield as the drone rose higher.

But Mu En did not choose to manufacture drones. The reason is very simple. After releasing the null energy shield, the virtual energy drone cannot protect itself.

This means that if someone destroys the drone, the nullifier shield will disappear completely.

Moreover, with the current technical conditions, he couldn't even produce the Orokin battery. Even if he produced a nullifier drone, he couldn't release a nullifier shield.

So Mu En planned to use his own void power as an energy source and utilize the void energy device to create a void energy field around him.

Even though the virtual energy stand has disappeared, it can reflect all attacks outside the stand. When the opponent enters the virtual energy stand, their abilities will be suppressed, forcing them to fight with you.

As the precision components were assembled together, a mechanical watch appeared in Mu En's hands.

"Ha, it's done! How about trying it first!"

As he spoke, he put on the watch and pressed the control button on the watch. A light blue energy instantly spread out from the watch and turned into an invisible presence that enveloped a two-meter radius around him.

"For now, that's pretty much enough!"

Feeling the opinions of the people around him, Mu En nodded with satisfaction.

The reason why the virtual energy field is only two meters is that the minimum coverage range he set on the watch is two meters, and the maximum coverage range is a radius of ten meters.

This is enough for Mu En. After all, the main function of the Null Energy Null Energy position is to defend against attacks hidden in the dark.

Pressing the control button again, the virtual energy field surrounding Mu En gradually disappeared.

“The effect is quite good, and this watch can continue to be equipped with new functions!”

This watch is very convenient to wear, and he can add more functions to it to deal with different situations.

Wearing the watch, Moon began to assemble new equipment.

This time he created a weapon, an energy blade that he designed specifically with reference to the glorious sword Excalibur [Holy Sword].

Like the Null Energy Watch, this energy blade also uses the power of the void as its energy source. Although it is not as powerful as a magnificent sword, it can still cut through iron like mud.

Most importantly, he can increase the output of void power and use energy blades to release sword energy to launch long-range attacks.

After continuous assembly and debugging, he finally made the energy blade.

The energy blade looks like a baton at first glance, but after the void power is injected, three void energies emerge from the stick and entangle with each other, forming a sharp blade.

“It looks pretty good!”

He gently swung it at a steel pipe next to him. He didn't feel any obstruction. The energy blade passed through the steel pipe very easily. It looked like light was shining through the steel pipe.

But the moment the energy blade passed through, a straight crack appeared on the steel pipe, and a small section of the steel pipe fell off. "Ha, isn't this the laser sword from Star Wars!" Mu En smiled and raised his eyebrows. "Try the long-range attack of the sword energy again."

After walking more than ten meters away, Mu En increased the injection of void power and swung the sword at the steel pipe again.

A black and white sword energy shot out from the energy blade and penetrated the steel pipe in an instant. With the sound of the steel pipe falling to the ground, the sword energy gradually dissipated.

"Hmm... the range of the sword energy is about twenty meters. It seems that it can only be used as a special measure!"

The sword energy of the energy blade could not be maintained for a long time, which did not meet Mu En's initial expectations.

In his design, the sword energy should be able to last for more than ten seconds, but now it only lasts for a few seconds and then begins to dissipate, which is far from his design.

However, Mu En still accepted this situation. After all, it was very good to be able to produce it using equipment that could only meet the minimum requirements.

After cutting off the power of the void, the sharp blade instantly disappeared, and the energy blade returned to the shape of a short stick.

After putting away the energy blade, Mu En began the final assembly work.

The remaining parts are used to assemble the last piece of equipment, and this piece of equipment is used to make up for his shortcomings in medium and long-range combat.

The equipment is called the War Blade. It is a ring-shaped weapon with three sharp blades. After being thrown, it can return to the hand like a boomerang.

Compared with the first two pieces of equipment, the difficulty of assembling the battle blade has increased a lot.

After all, this weapon is used for direct attack. If anything goes wrong, you will be the only one who will be in trouble.

Therefore, Mu En devoted almost all his energy to the assembly of the battle blade, ensuring that every joint of the battle blade was firmly connected together without any problems.

After the last part was installed, only a palm-sized battle blade disc appeared in his hand.

"Finally finished!"

Mu En yawned and fell asleep on the chair.

Assembling this weapon was really energy-consuming. Now he had no mood to experiment with weapons. He just wanted to have a good sleep.

……

The next day
Mu En woke up from his sleep. He struggled to find the frisbee he had made last night. After searching for a while, he found that the device was hanging on the chair.

"So it's here! Fortunately I found it. If I had lost it, I would have to start over again!"

Thinking of the assembly process last night, he couldn't help but feel a little numb.

The hand holding the war blade flying disc exerted a little force, and three sheaths popped out from the edge of the flying disc, and then the sharp blade also extended from the sheath of the flying disc.

"As expected of a weapon that took me so much effort to create, its sensitivity is really good!"

As he spoke, he swung the blade out. The blade spun rapidly in the air, and the moment it hit the wall, it left several cutting marks on the wall. After hitting the wall, it flew directly towards Mu En and returned to his hand.

The effect of the battle blade is good, both attack and recovery have met his expectations.

After retracting the blade of the battle sword and hanging it on the watch, Mu En nodded with satisfaction.

"I hope those guys won't hide for too long, otherwise all this equipment will be made in vain!"

(End of this chapter)